Apple ATI Graphics - Manual
Apple ATI Graphics – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – is facing down on the cloth.; Figure 2
- Page 3 – Figure 3; Unplug the power cord.
- Page 4 – Removing the Installed Memory; Figure 4
- Page 5 – Installing Memory; RAM Expansion Module Specifications; The memory expansion cards (DIMMs) must use SDRAM devices as; Procedure; the connectors or chips.; Figure 5
- Page 6 – Figure 6
- Page 7 – Closing the User Access Door; Figure 7; Carefully turn the computer right side up.; missing parts can damage your computer or cause injury.
eMac (ATI Graphics) and eMac (USB 2.0)
Memory
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Tools Required
• #2 Phillips screwdriver
Opening the User Access Door
1.
Save all open documents and quit all open applications.
2.
Turn the computer off by choosing Shut Down from the Special menu (if using Mac OS
9), or choose Shut Down from the Apple menu (if using OS X).
3.
Unplug all cables, except the power cord, from the computer. (Figure 1)
Warning:
If the internal modem is connected to a telephone line, disconnect the
telephone line from the internal modem port before you open the user access door.
This prevents electric shock.
Figure 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 2 4. Place a soft towel or cloth on the desk or surface. Position the computer so the screen is facing down on the cloth. 5. Use a Phillips screwdriver to remove the screw on the user access door. Set the user access door aside. (Figure 2) Figure 2
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 3 6. Important: To avoid electrostatic discharge, always ground yourself by touching metal before you touch any parts or install components inside the computer. To avoid generating static electricity, do not walk around the room until you have finished...
eMac (ATI Graphics) and eMac (USB 2.0) Memory - 4 Removing the Installed Memory 1. Push down the ejectors on the slot of the memory module you want to replace. (Figure 4) Figure 4 2. Holding the memory by both top corners, pull it straight out of the computer.
