Apple Power Mac G4 Battery - Manual

Apple Power Mac G4 Battery

Apple Power Mac G4 Battery – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
Page: / 6

Table of Contents:

  • Page 2 – Touch the metal PCI access covers on the back of the computer.; Figure 1; Unplug the power cord.
  • Page 3 – Replacing the Battery; Check the battery location in relation to the video card.; Figure 2
  • Page 4 – Figure 3; • Pull the card straight up, and remove it from the computer.; Figure 4
  • Page 5 – Remove the battery from its holder.; Figure 5; signs align with those on the holder.; only the battery supplied with this kit.
  • Page 6 – Closing the Computer; missing parts can damage your computer or cause injury.; Resetting Date and Time
Loading the manual

Power Mac G4 (Mirrored Drive Doors)

Battery

Replacement Instructions

Follow the instructions in this sheet carefully. Failure to follow these instructions could

damage your equipment and void its warranty.

Note:

Written and video instructions covering customer-installable parts are available at

http://www.info.apple.com/installparts/.

Warning: During this procedure, keep small parts away from children.

Tools Required

The only tool required for this procedure is a Phillips screwdriver.

Opening the Computer

Warning: Always shut down your computer before opening it to avoid damaging its

internal components or causing injury. After you shut down the computer, the

internal components can be very hot. Let the computer cool down before

continuing.

1.

Place your computer on a clean, flat surface.

2.

If you think your computer is in sleep, press the power button on the front of the

computer to wake it.

3.

Shut down your computer and wait five minutes before continuing.

4.

If you attached a security cable through the computer’s lockable cover latch, remove

the cable.

5.

Unplug all other cables from the computer except the power cord.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Touch the metal PCI access covers on the back of the computer.; Figure 1; Unplug the power cord.

Power Mac G4 (Mirrored Drive Doors) Battery - 2 6. Touch the metal PCI access covers on the back of the computer. (Figure 1) Figure 1 Important: To avoid electrostatic discharge, always ground yourself by touching the port access covers before you touch any parts or install any components inside the...

Page 3 - Replacing the Battery; Check the battery location in relation to the video card.; Figure 2

Power Mac G4 (Mirrored Drive Doors) Battery - 3 Replacing the Battery 1. Check the battery location in relation to the video card. (Figure 2) Figure 2

Page 4 - Figure 3; • Pull the card straight up, and remove it from the computer.; Figure 4

Power Mac G4 (Mirrored Drive Doors) Battery - 4 2. If a full-length video card extends over the battery, remove the video card as follows. • Using a Phillips screwdriver, remove the video card mounting screw. (Figure 3) Figure 3 • Gently hold back the clip on the video card connector to release the ...

Other Apple Models

All Apple Other