Apple 073-0558 - Manual
Apple 073-0558 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Opening the Computer; Warning: Always turn off your computer before opening it to avoid
- Page 3 – Power Mac G4 Zip Drive -; Warning: If you see any lights glowing on the main logic board,; Removing the Installed Zip Drive; Press the clips behind the drive faceplate assembly, rotate the
- Page 5 – Installing the Replacement Zip Drive
- Page 7 – Closing the Computer; Warning: Never turn on your computer unless all of its internal
K
Power Mac G4 / Macintosh Server G4
073-0558 Rev. B
Zip Drive
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow
these instructions could result in damage to your equipment and may void
your warranty.
Replacing the Zip drive requires five basic steps:
• Turn off the computer.
• Open the computer.
• Remove the installed Zip drive.
• Install the replacement Zip drive.
• Close the computer.
Note:
Written and video instructions covering customer-installable parts
are available at http://www.info.apple.com/installparts/.
Tools Required
The only tool required for this procedure is a Phillips screwdriver.
Electrostatic Discharge (ESD)
Static electricity, a normal and natural phenomenon, builds up on your body
as you walk around. You experience an electrostatic discharge (ESD) when
you touch an object and feel a shock or see a spark. ESD can cause
damage to the internal components of your computer. To avoid ESD
damage, read and follow all instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 - Power Mac G4 Zip Drive Opening the Computer Warning: Always turn off your computer before opening it to avoid damaging its internal components. 1 Place your computer on a clean, flat surface. 2 If you think your computer is in sleep, press the power button on the front of the computer to wake it...
Power Mac G4 Zip Drive - 3 Warning: If you see any lights glowing on the main logic board, the computer has not been shut down. Close the side access panel and shut down the computer before proceeding. Removing the Installed Zip Drive 1 Press the clips behind the drive faceplate assembly, rotate the...
Power Mac G4 Zip Drive - 5 7 Remove the four screws that mount the Zip drive to the carrier and slide the drive out of the carrier. Installing the Replacement Zip Drive 1 Slide the replacement Zip drive into the lower bay in the drive carrier. Insert the screws from the old drive through the side ho...
