Apple 073-1349 REV. A - Manual
Apple 073-1349 REV. A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Required Tool; Removing the
- Page 3 – Installing the
- Page 4 – Formatting a New Drive
- Page 5 – Reinstalling Software that Came with the Computer; Part One: Erasing the hard drive/formatting the hard drive
- Page 6 – Part Three: Completing the Mac OS X Setup Assistant
- Page 7 – Part Four: Restoring the bundled applications
073-1349 Rev. A
1
© 2010 Apple Inc. All rights reserved.
Mac Pro
First Steps
1
Shut down computer.
2
Wait 10 minutes.
W
arning:
Parts inside
computer can be very
hot. Allow computer
to cool down before
continuing.
3
Unplug all external
cables except power
cord.
4
Touch metal PCI cover
on back of computer.
5
Unplug power cord.
Opening the
Computer
1
Hold side access
panel and lift latch on
back of computer.
Warning:
Edges of
access panel and
enclosure can be
sharp. Be careful
when handling.
2
Remove access panel
and place it on flat
surface covered by
soft, clean cloth.
Solid-State Drive
Replacement Instructions
Note:
Follow these instructions carefully. Failure to do so could damage your equipment and
void its warranty.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
073-1349 Rev. A 2 © 2010 Apple Inc. All rights reserved. Required Tool Phillips #1 screwdriver Removing the Installed Drive 1 Make sure latch on back panel is up, so that drives and carriers are unlocked. 2 Pull drive carrier (with drive) out of drive bay.
073-1349 Rev. A 3 © 2010 Apple Inc. All rights reserved. 3 Remove 2 screws on side of carrier adapter. 4 Slide solid-state drive out of adapter. Installing the Replacement Drive 1 Slide replacement drive into adapter as shown, label side down and connector facing out. 2 Replace mounting screws. 3 Sl...
073-1349 Rev. A 4 © 2010 Apple Inc. All rights reserved. Closing the Computer 1 Replace access panel. Note: Make sure latch is up before you replace panel. If latch is down, panel will not seat correctly. 2 Push latch down to close and secure access panel. Warning: Never turn on computer unless all ...
