Apple 073-1066 - Manual
Apple 073-1066 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Unplug the power cord.
- Page 3 – Removing the Installed Battery; Remove the battery from its holder.
- Page 4 – Installing the Replacement Battery; Replace the access panel.
- Page 5 – written consent of Apple.
Mac Pro
073-1066 Rev. A
Battery
Replacement Instructions
Follow the instructions in this document carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Tools Required
No tools are required for this procedure. You may, however, find a flat-blade screwdriver useful in
removing the battery from its holder.
Opening the Computer
Shut down the computer.
Warning: Always shut down the computer before opening it to avoid damaging its
internal components or the components you are installing. Do not open the computer
or attempt to install items inside it while it is on.
Wait 5 to 10 minutes to allow the computer’s internal components to cool.
Warning: After you shut down the system, the internal components can be very hot. You
must let the computer cool down before continuing.
Unplug all external cables from the computer except the power cord.
Touch the metal PCI access covers on the back of the computer to discharge any static
electricity from your body.
Important: Always discharge static before you touch any parts or install any
components inside the computer. To avoid generating static electricity, do not walk
around the room until you have finished working and closed the computer.
1.
2.
3.
4.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Mac Pro Battery Unplug the power cord. Hold the side access panel and lift the latch on the back of the computer. Warning: The edges of the access panel and the enclosure can be sharp. Be very careful when handling them. Remove the access panel and place it on a flat surface covered by a soft, clean...
Mac Pro Battery Removing the Installed Battery Carefully lay the computer on its side so that the open side faces up. Locate the battery. Remove any PCI Express card that blocks access to the battery. (See the replacement instructions for “PCI Express/Graphics Card.”) Slide the battery out from unde...
Mac Pro Battery Installing the Replacement Battery Insert the new battery into the holder, making sure the battery’s positive symbol (+) faces up. Warning: Installing the battery incorrectly may cause an explosion. Be sure the battery’s positive and negative sides are correctly oriented in the holde...
