Apple 073-0635 - Manual
Apple 073-0635 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Figure 3; Flip the keyboard over and lay it on the palm rests and trackpad.; Figure 4
- Page 4 – Figure 5; Locate the keyboard cable connector.; Figure 6
- Page 5 – Installing the Replacement Keyboard; Figure 7; Flip the keyboard back toward the keyboard opening in the case.; Figure 8
- Page 6 – Lay the keyboard flat into the keyboard opening.; Figure 9; Release the tabs to secure the keyboard in place.; missing parts can damage your computer or cause injury.
073-0635 Rev. A
PowerBook G4 (Gigabit Ethernet)
Keyboard
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Warning: During this procedure, keep small parts away from children.
Tools Required
The only tool required for this procedure is a jeweler’s flat-blade screwdriver
(if keyboard is locked).
Removing the Installed Keyboard
Warning: Always shut down your computer before opening it to avoid damaging its
internal components or causing injury. After you shut down the computer, the
internal components can be very hot. Let the computer cool down before
continuing.
1.
Place your computer on a clean, flat surface.
2.
Shut down your computer and wait thirty minutes before continuing.
3.
Disconnect the power cord and any other cables connected to the computer.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PowerBook G4 (Gigabit Ethernet) Keyboard - 3 9. Release the keyboard by pulling down on the keyboard release tabs (located to the left of the F1 and F12 keys) (Figure 3) , then lift the top portion of the keyboard up slightly, and toward the display. Figure 3 10. Flip the keyboard over and lay it on...
PowerBook G4 (Gigabit Ethernet) Keyboard - 4 11. Touch the computer’s inside framework (a dull gray conductive composite material) to discharge any static electricity, as shown (Figure 5) . Important: To avoid electrostatic discharge damage, always ground yourself by touching the computer’s framewor...
PowerBook G4 (Gigabit Ethernet) Keyboard - 5 Installing the Replacement Keyboard 1. Lay the replacement keyboard in the correct orientation over the keyboard opening, then flip it toward you and lay it face down on the palm rests and trackpad to expose its connector cable. (Figure 7) Figure 7 2. Fir...
