Apple 073-0542 - Manual
Apple 073-0542 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Removing the Computer Core From the Enclosure; Warning: Always turn off your computer before opening it to avoid
- Page 4 – - Power Mac G4 Cube Battery; Replacing the Battery; and negative signs are also marked on the battery holder.)
- Page 5 – Replacing the Computer Core in the Enclosure
- Page 6 – Resetting Date and Time; Replacing the battery changes the date and time settings on your
K
Power Mac G4 Cube
073-0542
Battery
Replacement Instructions
Be sure to follow these instructions carefully. Failure to follow these
instructions could result in damage to your equipment and may void your
warranty.
Replacing the battery requires five basic steps:
• Turn off the computer.
• Remove the computer core from the enclosure.
• Remove the installed battery.
• Install the replacement battery.
• Replace the computer core in the enclosure.
Note:
A video version of the replacement instructions is available at
http://www.info.apple.com/installparts
Tools Required
No tools are required for this procedure.
Electrostatic Discharge (ESD)
Static electricity, a normal and natural phenomenon, builds up on your body
as you walk around. You experience an electrostatic discharge (ESD) when
you touch an object and feel a spark. ESD can cause damage to the
internal components of your computer. Avoid walking around while
performing this procedure, and follow the instructions carefully when you
are asked to discharge static electricity.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 - Power Mac G4 Cube Battery Removing the Computer Core From the Enclosure Warning: Always turn off your computer before opening it to avoid damaging its internal components. 1 Place your computer on a clean, flat surface. 2 Shut down your computer by opening the Special menu and choosing Shut Down...
4 - Power Mac G4 Cube Battery Replacing the Battery 1 Note the orientation of the installed battery’s positive (+) end. (Positive and negative signs are also marked on the battery holder.) 2 At the battery’s positive end, place your finger between the battery and the holder. Gently pry the battery o...
Power Mac G4 Cube Battery - 5 Replacing the Computer Core in the Enclosure 1 Holding the core by the latch, insert the core into the computer. Note: The core fits into the enclosure only one way. Position the core so the ports are toward the back of the enclosure. 2 With a flat hand, press down on t...
