Apple 030-9106-A - Manual
Apple 030-9106-A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing the video input card; Grounding clip; Update to Your Manual
- Page 3 – Installing the software; Insert the first disk of the
- Page 4 – Adjusting the picture
- Page 5 – Troubleshooting; You don’t hear any sound.
- Page 6 – You have a dark or “rolling” picture.; If your VCR is connected to a TV monitor; The sound is intermittent or clipped.
- Page 7 – The sound is full of static.; Turn up the volume controls on your video equipment.; If this port is present, then a TV tuner card is installed.
Update to Your Manual
This document contains five sections that update your
manual. When you reach the corresponding sections in your
manual, return to this update first for information.
The information in this update applies to you whether your
manual is the
Apple TV/Video System User’s Guide
or the
Apple Video System User’s Guide
.
What you should have
In addition to the items shown in your manual in the section
“What You Should Have,” in Chapter 1, look for the metal
grounding clip for the video input card (as shown below).
Note:
The grounding clip may be attached to the video
input card, or it may be a separate piece in your package.
Grounding clip
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installing the video input card Before you install the video input card in your Macintoshcomputer, make sure that the metal grounding clip isattached to the S-video port on the card. Without thegrounding clip, devices attached to the S-video port mightnot receive sufficient power.The following instr...
Installing the software When you get to the section “Installing the Software,” inChapter 1 of your manual, follow these updated instructionsto install the Apple Video Player application. 1 Start the computer. 2 Insert the first disk of the Video Software Installer disk set into the floppy disk drive...
Adjusting the picture The video controls in the Apple Video Player software thatcomes in your package look a little different from what isshown in the manual. Instead, they look like those shownhere: Although these controls look different from those in yourmanual, they work just as your manual says:...
