APC SMT3000 - User Manual
A hardware installation manual for the SMT 2200/3000 VA UPS tower kit covers critical safety protocols, including hazard severity classifications for warning symbols and electrical handling guidelines. The guide emphasizes proper electrical work–such as de-energizing circuits and using certified professionals–to prevent shocks or injuries during setup. It also details component inventory (e.g., terminal blocks, wire nuts) and step-by-step wiring instructions for connecting ground, input, and output cables to the UPS system.
Table of Contents:
- Page 1 – Safety Symbol Definitions
- Page 2 – Product Handling and Component Inventory
- Page 3 – UPS Hardware Installation Procedures
- Page 4 – Hardware Wiring and Terminal Block Connections
- Page 5 – UPS Tower Panel Mounting
- Page 6 – Customer Support Information
Installation Guide SMT 2200/3000 VA
Input/Output Hardwire Kit
Important Safety Messages
SAVE THESE INSTRUCTIONS - This section contains important instructions
that should be followed during
installation and maintenance of the UPS and
batteries.
Read these instructions carefully and look at the equipment to become familiar with the device before
trying to install, operate, service or maintain it. The following special messages may appear throughout
this bulletin or on the equipment to warn of potential hazards or to call attention to information that
clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical
hazard exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey
all safety messages that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- APC
- Model
- SMT3000
- Document type
- User Manual
- Category
- Uninterruptable Power Supply
- Language(s)
- English
- Pages
- 6
- File size
- 512.8 KB
- Format
Summary
Definitions and severity levels for safety symbols including DANGER, WARNING, CAUTION, and NOTICE labels.
Guidelines for handling the hardware kit, safety protocols for hardwiring circuits, and inventory of components such as terminal blocks and panels.
Instructions for removing PDU panels, disconnecting cables, installing replacement panels, and warnings regarding electric shock risk during installation.
