Amtrol WELL-X1 - Manual
Amtrol WELL-X1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DAMAGE. • DO NOT ADJUST THE PRE-CHARGE PRESSURE; RELIEF VALVE REQUIRED. A relief valve; GENERAL SAFETY INFORMATION
- Page 4 – INSTALLATION AND SIZING CONSIDERATIONS; SELECTION FOR CONSTANT PRESSURE; SELECTION FOR STANDARD SYSTEMS; A. STANDARD OPERATION
- Page 5 – INSTALLATION CONSIDERATIONS; LOCATION; • Ensure a Tuf Kote; ORIENTATION; may be installed below grade in a well pit or other suitable
- Page 6 – will allow the Well-X1
- Page 7 – A drip pan connected to an adequate
- Page 8 – Shut off the circuit breaker for the well system. Loosen; and labeled appropriately.; After completing the wiring, reattach the front cover by
- Page 9 – After plumbing and wiring are complete, close the; by turning on the; After a slight pause, the pump will start and the system; arrow
- Page 10 – Slowly open the service valve to allow the system to; to begin drawing water from
- Page 11 – To enter the programming mode, press and hold the; and; PRESSURE ADJUSTMENT; CUT
- Page 12 – • Do not adjust or add pressure if there has been a loss
- Page 13 – PUMP PROTECTION AND DIAGNOSTICS; alert the user to a potential problem, prompting service.; ERROR CODES; ERROR CODE; or waterlogged tank. Pump
- Page 15 – REPLACEMENT PARTS; DESCRIPTION
- Page 16 – AMTROL INC. LIMITED PRODUCT WARRANTY
INSTALLATION, OPERATION
& MAINTENANCE
INSTRUCTIONS
9013-0001 (3/08)
WELL-X-TROL
®
WELL-X1
™
INSTALLER: LEAVE THIS MANUAL WITH THE OWNER
IMPORTANT GENERAL SAFETY INFORMATION - ADDITIONAL SPECIFIC SAFETY ALERTS APPEAR IN THE FOLLOWING INSTRUCTIONS.
READ CAREFULLY THE PRODUCT INSTALLATION, OPERATING AND MAINTENANCE MANUAL. FAILURE TO FOLLOW
THE INSTRUCTIONS AND WARNINGS IN THE MANUAL MAY RESULT IN SERIOUS OR FATAL INJURY AND/OR PROPERTY DAMAGE,
AND WILL VOID THE PRODUCT WARRANTY. THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED PROFESSIONAL. FOLLOW ALL
APPLICABLE LOCAL AND STATE CODES AND REGULATIONS, IN THE ABSENCE OF SUCH CODES, FOLLOW THE CURRENT EDITIONS OF
THE NATIONAL PLUMBING CODE AND NATIONAL ELECTRIC CODE, AS APPLICABLE.
This is the safety alert symbol. It is used to alert you to personal injury hazards. Obey all safety instructions that follow this symbol to
reduce the risk of possible injury or death as well as property damage.
West Warwick, Rhode Island 02893
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. TABLE OF CONTENTS GENERAL SAFETY INFORMATION ........................................................... 2 COMPONENTS ........................................................................................... 3 INSTALLATION AND SIZING CONSIDERATIONS ..................................... 4 INSTAL...
4 4. INSTALLATION AND SIZING CONSIDERATIONS The Well-X1 ™ functions like a traditional pressure switch by cycling the pump on and off. The factory pressure settings are 40 psi cut-in and 60 psi cut-out. The controller allows these settings to be adjusted to best suit the application. The Well-X1 ™ c...
5 5. INSTALLATION CONSIDERATIONS LOCATION The Well-X1 ™ is designed for indoor and outdoor installations. The NEMA 3R enclosure can be installed in direct weather. If installed outdoors, be sure the following conditions are met: • Do not install where ambient temperatures can drop below freezing or ...
