Page 2 - General information and tips
CONTENTS 4 SAFETY INFORMATION6 PRODUCT DESCRIPTION6 ACCESSORIES7 CONTROL PANEL9 WASHING PROGRAMMES 11 CONSUMPTION VALUES12 BEFORE FIRST USE12 USING THE APPLIANCE12 LOADING THE LAUNDRY12 FILLING THE DETERGENT AND ADDITIVES13 SETTING AND STARTING A PROGRAMME14 AT THE END OF PROGRAMME14 HELPFUL HINTS A...
Page 3 - We recommend the use of original spare parts.
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative technologies that helpmake life simpler – features you might not find on ordinary appliances. Please spenda few minutes reading to get the very best from ...
Page 4 - SAFETY INFORMATION
SAFETY INFORMATION Before the installation and use, read thismanual carefully:• For your safety and the safety of your property • To help the environment• For the correct operation of the appli- ance. Always keep these instructions with theappliance also if you move or give it to adifferent person.T...
Page 6 - Plastic cap
PRODUCT DESCRIPTION 2 3 1 5 4 6 8 7 6 11 9 10 1 Control panel 2 Lid 3 Lid handle 4 Filter access door 5 Lever to move the appliance 6 Adjustable feet 7 Mains cable 8 Water inlet valve 9 Water drain hose 10 Transit bolts 11 Feet for the appliance level ACCESSORIES 1 2 3 1 Plastic cap To close the hol...
Page 7 - CONTROL PANEL; ON OFF BUTTON
CONTROL PANEL 4 5 6 7 8 9 1 2 3 1 On/Off button 2 Programme knob 3 Display 4 Start/Pause button 5 Delay start button 6 Time saving button 7 Extra rinse button 8 Spin button 9 Temperature button ON OFF BUTTON 1 Press this button to activate or deactivatethe appliance. A tune sounds when theappliance ...
Page 8 - If the programme is completed but the symbol stays on:; DELAY START BUTTON
The display shows: A • The programme time When the programme starts, the time decreases with steps of 1 minute. • The delay start When you press the delay start button, the display shows the delay starttime. • Alarm codes If the appliance has a malfunction, the display shows alarm codes. Referto 'Tr...
Page 9 - WASHING PROGRAMMES; Functions
TEMPERATURE BUTTON 9 Press button 9 to change the default temperature. CHILD LOCK FUNCTION This function prevents children to playwith the control panel.• To activate the function, press button 6 and button 7 at the same time un- til the display shows the symbol . • To deactivate the function, press...
Page 10 - SPIN REDUCTION
ProgrammeTemperature Type of loadmax. weight of load Cycledescription Functions Delicates(Feinwäsche /Délicats)40° - Cold Delicate fabrics asacrylics, viscose, poly-ester items with nor-mal soil.max. 2,5 kg WashRinsesShort spin SPIN REDUCTIONRINSE HOLDEXTRA RINSETIME SAVE 1) Wool (Wolle / Laine)40° ...
Page 11 - CONSUMPTION VALUES
1) if you press the button 6 two times (Extra Quick duration), we recommend that you decrease the quantity of the load. It is possible to load fully the appliance, however thewashing results are reduced. 2) The wash and spin phase is soft to prevent the creases of the laundry. The appliance adds som...
Page 12 - Press button; LOADING THE LAUNDRY; Open the lid of the appliance.; FILLING THE DETERGENT AND ADDITIVES; The detergent compartment for the prewash phase.
BEFORE FIRST USE Put a small quantity of detergent in themain wash compartment of the detergentdispenser. Set and start a programme for cotton at the highest temperature withoutlaundry. This removes all possible dirtfrom the drum and the tub. USING THE APPLIANCE 1. Open the water tap. 2. Connect the...
Page 13 - SETTING AND STARTING A PROGRAMME; Steam
SETTING AND STARTING A PROGRAMME 1. Turn the programme knob. 2. The indicator of button 4 flashes with red colour. 3. The indicators of the default tempera-ture and spin speed come on. Tochange the temperature and/or thespin speed, press the related buttons. 4. Set the available functions and thedel...
Page 14 - THE LAUNDRY LOAD
AT THE END OF PROGRAMME • The appliance stops automatically.• The acoustic signals operate.• In the display comes on. • The indicator of the Start/Pause button 4 goes off. • You can open the lid 2 minutes after the appliance stops. The door lock sym-bol goes off. • Press button 1 to deactivate the a...
Page 15 - soft
DETERGENTS AND ADDITIVES • Only use detergents and additives spe- cially made for washing machines. • Do not mix different types of deter- gents. • To help the environment, do not use more than the correct quantity of deter-gent. • Obey the instructions that you find on the on packaging of these pro...
Page 16 - CARE AND CLEANING; DESCALING; gent with biological properties.; DETERGENT DISPENSER; To clean the dispenser:; Clean all the parts with water.; DRAIN FILTER; • Disconnect the mains plug from; To clean the drain filter:
CARE AND CLEANING WARNING! Disconnect the appliance from the mainssupply before you clean it. DESCALING The water we use contains limescale. If itbecomes necessary, use a water softenerto remove limescales.Use a special product made for washingmachines. Obey the instructions that youfind on the pack...
Page 17 - To clean the water inlet filters:
1. Open the drain filter door. 2. Put a container below the recess ofthe drain filter to collect the waterthat flows out. Turn the filter until it isvertical. 3. Turn the filter fully and remove it. 4. Remove fluff and objects. 5. Clean the filter with water. 6. Put it back and screw it in. 7. Make ...
Page 18 - Disconnect the appliance.
4. Remove the inlet hose behind theappliance. 5. Clean the filter in the valve with a stiffbrush or a towel. 90˚ 6. Install again the inlet hose. Make surethat the couplings are tight to pre-vent leakages. 7. Open the water tap. EMERGENCY DRAIN Because of a malfunction, the appliancecannot drain the...
Page 19 - TROUBLE SHOOTER AND SERVICE; - The appliance does not fill with; Problem; The water tap is closed.
TROUBLE SHOOTER AND SERVICE The start of the appliance does not occuror it stops during operation.First try to find a solution to the problem(refer to the table). If not, contact the serv-ice centre. With some problems, the acousticsignals operate and the display showsan alarm code: • - The applianc...
Page 21 - Too much laundry load.; SERVICE; • Refer to the information supplied with
Problem Possible cause Possible solution The appliance fillswith water anddrain immediately. The end of the drainhose is too low. Make sure that the drain hose isin the correct position. The washing re-sults are not satis-factory. The detergent you usedwas not sufficient or cor-rect. Increase the de...
Page 22 - UNPACKING
TECHNICAL INFORMATION Dimensions Width / Height / Depth 400 / 850 / 600 mm Electrical connection: VoltageOverall powerFuseFrequency 230 V 2200 W 10 A 50 Hz Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Water supply 1) Cold water Maximum load Cotton 6 kg Spin speed Maximum ...
Page 24 - Remove the plastic piece.; POSITIONING AND LEVELLING; Pull the lever from right to left.
1 1 2 10. Remove the plastic piece. 11. Replace the plastic spacer with theplastic cap. You can find this cap inthe user manual bag. 12. To install the appliance at the samelevel as neighbouring furniture, cutthese plastic pieces. WARNING! Remove all the packaging and thetransit bolts before you ins...
Page 25 - • The appliance must be level and stable.; THE INLET HOSE
A 3. Install the appliance on a flat hardfloor. 4. Make sure that carpets do not stopthe air circulation below the appli-ance. 5. Make sure that the appliance doesnot touch the wall or other units. 6. Loosen the feet to adjust the level.Measure with a spirit level. Tightenthe pieces A. 7. A correct ...
Page 26 - WATER DRAINAGE; With the plastic hose guide.
2. Connect the water inlet hose to thecold water tap with 3/4 thread. CAUTION! Make sure that there are no leaksfrom the couplings. Do not use an extension hose ifthe inlet hose is too short. Contactthe service centre for the replace-ment of the inlet hose. Water-stop device A The inlet hose has a w...
Page 27 - Without the plastic hose guide.; • Directly to a built-in drain pipe in the
• On the edge of a sink.• Make sure that the plastic guide cannot move when the appliance drains. At-tach the guide to the water tap or thewall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into adrain pipe at a height of not less than70 cm and not more than 100 cm. Theend o...
