Page 2 - spend a few minutes reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.; SAFETY INFORMATION; Before the installation and use of the appliance,
CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................
Page 4 - SAFETY INSTRUCTIONS; Installation
• CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. • WARNING: Danger of fire: Do not store items on the cooking surfaces. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can...
Page 7 - PRODUCT DESCRIPTION; Cooking surface layout; Control panel layout
3. PRODUCT DESCRIPTION 3.1 Cooking surface layout 1 2 1 3 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 3.2 Control panel layout 1 2 3 6 7 5 12 11 13 10 9 8 4 Use the sensor fields to operate the appliance. The displays, indicators and sounds ...
Page 8 - Heat setting displays; OptiHeat Control (3 step
Sensorfield Function Comment 8 Hob²Hood To activate and deactivate the manual modeof the function. 9 PowerBoost To activate and deactivate the function. 10 - Control bar To set a heat setting. 11 - To select the cooking zone. 12 / - To increase or decrease the time. 13 - Control bar To set the heat ...
Page 9 - DAILY USE
4. DAILY USE WARNING! Refer to Safety chapters. 4.1 Activating and deactivating Touch for 1 second to activate or deactivate the hob. 4.2 Automatic Switch Off The function deactivates the hob automatically if: • all cooking zones are deactivated, • you do not set the heat setting after you activate ...
Page 11 - OffSound Control
Touch for 4 seconds. comes on.Deactivate the hob with . To deactivate the function: activate the hob with . Do not set the heat setting.Touch for 4 seconds. comes on.Deactivate the hob with . To override the function for only onecooking time: activate the hob with . comes on. Touch for 4 seconds. Se...
Page 12 - FLEXIBLE INDUCTION COOKING AREA; FlexiBridge function
Auto-maticlight Boiling 1) Frying 2) ModeH2 3) On Fanspeed 1 Fanspeed 1 Mode H3 On Off Fanspeed 1 Mode H4 On Fanspeed 1 Fanspeed 1 Mode H5 On Fanspeed 1 Fanspeed 2 Mode H6 On Fanspeed 2 Fanspeed 3 1) The hob detects the boiling process and acti- vates fan speed in accordance with automaticmode. 2) T...
Page 13 - FlexiBridge Standard
To set the heat setting use two left side control bars. Switching between the modes To switch between the modes use sensorfield: . When you switch between the modes the heat setting is set back to 0 . Diameter and position of the cookware Choose the mode applicable to the size and the shape of the c...
Page 14 - FlexiBridge Max Bridge
5.3 FlexiBridge Big Bridge mode To activate the mode press until you see the correct mode indicator . This mode connects three rear sections into one cooking zone. The one front section is not connected and operates as a separate cooking zone. You can set the heat setting for each zone separately. U...
Page 15 - PowerSlide function
5.5 PowerSlide function This function allows you to adjust the temperature by moving the cookware to a different position on the induction cooking area.The function divides the induction cooking area into three areas with different heat settings. The hob detects the position of the cookware and adju...
Page 16 - HINTS AND TIPS; Cookware; The noises during; Examples of cooking
6. HINTS AND TIPS WARNING! Refer to Safety chapters. 6.1 Cookware For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with correct cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainles...
Page 17 - Hints and Tips for
Heat setting Use to: Time(min) Hints - 1 Keep cooked food warm. as nec-essary Put a lid on the cookware. 1 - 3 Hollandaise sauce, melt: but-ter, chocolate, gelatine. 5 - 25 Mix from time to time. 1 - 3 Solidify: fluffy omelettes,baked eggs. 10 - 40 Cook with a lid on. 3 - 5 Simmer rice and milkbased...
Page 18 - CARE AND CLEANING; General information; TROUBLESHOOTING
Other remotely controlled appliances may block the signal. Do not use any remotely controlled appliances at the time when you use the function on the hob. Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The A...
Page 21 - If you cannot find a; INSTALLATION; Before the installation
8.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error messag...
Page 22 - TECHNICAL DATA; Rating plate; Cooking zones specification
min.28 mm min. 12 mm min. 60mm 10. TECHNICAL DATA 10.1 Rating plate Model IKE64471XB PNC 949 597 226 00 Typ 62 B4A 05 AA 220 - 240 V / 400 V 2N 50 - 60 Hz Induction 7.35 kW Made in Germany Ser.Nr. ................. 7.35 kW AEG 10.2 Cooking zones specification Cooking zone Nominal power(maximum heats...
Page 23 - ENERGY EFFICIENCY; Product information according to EU 66/2014
Cooking zone Nominal power(maximum heatsetting) [W] PowerBoost[W] PowerBoostmaximum dura-tion [min] Cookware diam-eter [mm] Flexible induc-tion cookingarea 2300 3200 10 minimum 100 The power of the cooking zones can be different in some small range from the data in the table. It changes with the mat...
Page 24 - ENVIRONMENTAL CONCERNS
12. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household wast...