AEG F55340VI1- User Manual

5.1 Consumption values Programme 1) Water (l) Energy (kWh) Duration (min) P1 9.9 0.932 195 P2 7 - 12 0.6 - 1.4 40 - 150 P3 13 - 15 1.3 - 1.5 140 - 160 P4 9 0.9 30 P5 4 0.1 14 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes ...

The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is im...

If you use standard detergent or multi- tablets without rinse aid, activate the notification to keep the rinse aid refill indicator active. How to deactivate the rinse aid empty notification The appliance must be in programme selection mode. 1. To enter the user mode, press andhold simultaneously an...

If the option is not applicable to the program, the related indicator does not come on or it flashes quickly for a few seconds and then goes off. The display shows the updated program duration. 7.2 TimeSaver This option increases the pressure and the temperature of the water. The washing and the dry...

8.2 How to fill the rinse aid dispenser A B D C M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Press the release button ( D ) to open the lid ( C ). 2. Pour the rinse aid in the dispenser ( A ) until the liquid reaches the fill level 'max'. 3. Remove ...

End of the programme When the programme is completed the display shows 0:00 . 1. Press the on/off button or wait for the AUTO OFF function to automatically deactivate the appliance. 2. Close the water tap. 10. HINTS AND TIPS 10.1 General The following hints will ensure optimal cleaning and drying re...

• Make soft the remaining burned food on the items. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • Make sure that glasses do not touch other glasses. • Put small items in the cutlery basket...

12. TROUBLESHOOTING If the appliance does not start or it stops during operation. Before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. WARNING! Repairs not properly done may result in serious risk to the safety...

Problem and alarm code Possible cause and solution The program lasts too long. • Select the TimeSaver option to shorten the program time. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown. The remaining time in thedisplay increases and skipsnearly to...

Problem Possible cause and solution Limescale deposits on the ta-bleware, on the tub and onthe inside of the door. • Refer to "The water softener" . Dull, discoloured or chippedtableware. • Make sure that only dishwasher-safe items are washed in the appliance. • Load and unload the basket ca...