Page 3 - Contents; Magnetic
3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Appliance Packaging Information . . . . . . . . . . . . . . . . . . ....
Page 4 - Important Safety Instructions; Intended use; for freezing; Prior to initial start–up
4 Important Safety Instructions These warnings are provided in the interests of your safety. Ensureyou fully understand them before installing or using the appliance.Your safety is of paramount importance. If you are unsure about themeaning of these warnings contact the Customer Care Departmentfor a...
Page 6 - Disposal; Appliance Packaging Information; that children
6 • This product should be serviced by an authorised engineer and only genuine spare parts should be used. • Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may causeinjury or serious malfunctioning. Contact your local Service ...
Page 7 - Pull off the adhesive tape on the left and right side of the door.; Installation; Installation Location; radiators or
7 Remove T ransport P ackaging The appliance and the interior fittings are protected for transport. 1. Pull off the adhesive tape on the left and right side of the door. 2. Remove all adhesive tape and packing pieces from the interior of theappliance. Installation Installation Location The appliance...
Page 8 - Your; Warning; To ensure the appliance functions correctly; Dimensions of the recess
and safety instructions must be adhered to. Considering the numerousinstallation conditions which are possible, there is no way of providingdetailed information here. It is necessary to avoid overheating of the refrigerator by maintainingadequate distances from heat sources and by the use of a suita...
Page 11 - Remove the brackets and mark a dis-
11 Installation 9. Open the appliance door and the furni-ture door at 90°. Insert the small square(Hb) into guide (Hb). Put together theappliance door and the furniture doorand mark the holes as indicated in thefigure. PR167 Ha Hb 8mm 11. Place the small square on the guide againand fix it with the ...
Page 12 - Power; Service Force Centre
12 Installation Power S upply A correctly installed, earthed socket is required for the electrical sup-ply. The supply must have a fuse rating of at least 13 Amps. If the socket is not accessible once the appliance is built in, the electricalinstallation must include suitable means of isolating the ...
Page 13 - Electrical Connection; Important; Neutral
13 Installation Electrical Connection Any electrical work required to install this appliance should be carriedout by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHEDThe manufacturer declines any liability should these safety mea-sures not be observed. Before swit...
Page 14 - View of the
14 Description of the A ppliance View of the A ppliance 1 = Control panel2 = Drawer (for storing frozen food and freezing fresh produce)3 = Drawer (for storing frozen food and freezing fresh produce)4 = Drawer (for storing frozen food only)5 = Drawer (for storing frozen food only)6 = Temperature dis...
Page 15 - Prior to Initial Start–Up; Ice
15 Prior to Initial Start–Up 1. Please clean the appliance interior and all accessories prior to initialstart-up (see section: “Cleaning and Care”). 2. Remove the ice pack from the appliance. 3. Only put the ice pack to freeze in the top drawer after the optimum storage temperature of –18°C has been...
Page 16 - tio; yellow; fast freeze
16 Operating and I ndicator P anel Important! Only use the appliance when built-in! A Pilot light (green) B Thermostat control knob C Fast freeze light (yellow) D Fast freeze button, also used to switch off the warning tone E Warning light (red) The green pilot light (A) , which comes on switching t...
Page 17 - Temperature Warning; when the appliance is switched on for the first time, the warn-
17 Operating and indicator panel not start immediately, but does after some time. This does not meanthat your appliance has a fault. After adjusting the temperature, leave the appliance to set tempera-ture and allow 24 hours for the temperature to sta bi lise before making further changes. 1. Turn t...
Page 18 - Recommended regulator setting:; Regularly check on the red temperature pilot light (E) and; If the appliance is not going to be used for an extended period:; Leave the door open to avoid the build up of odours.
18 Starting U p and T emperature R egulation 1. Turn the thermostat regulator knob (B) in the direction of “1”, a soundis on only for 2 sec. The compressor starts and then runs automatically. 2. The red lamp (E) blinks and the sound alarm signal. Reset the soundalarm signal pushing the switch (D) . ...
Page 20 - Storage Goods Symbols/Freezing Calendar
20 Storage Goods Symbols/Freezing Calendar • The symbols on the drawers show different types of frozen goods. • The numbers indicate storage times in months for the appropriate typesof frozen goods. Whether the upper or lower value of the indicatedstorage time is valid depends on the quality of the ...
Page 22 - Cleaning and Care; switched back on
22 4. Remove all drawers. Insert the plasticscraper in the special location to act as anextension channel and place a basin under-neath to collect the defrost water. Tip: To speed up the defrosting process, place a plastic bowl with warm water in the appliance and close the door.Remove pieces of ice...
Page 23 - and at the back wall of the appliance. Never cover air vent openings.
23 4. Clean the appliance and the interior accessories with a cloth and luke-warm water. A mild solution of washing up liquid and water may also be used. 5. After cleaning wipe with fresh water and rub dry.To guarantee a safe operation of the fridge, once a year remove theventilation grill at the ba...
Page 24 - Correcting Malfunctions; Repairs to refrigerators/freezers may only be performed by; Symptom
24 Yellow light does not lightup, when the fast freezefunction is activated,appliance is on. Yellow light faulty. Please inform your localService Force Centre. What to do if ... Correcting Malfunctions Please check whether the pilot lights come on, the refrigerating unitoperates, and the internal te...
Page 25 - regularly check on the red temperature pilot light and
25 What to do if ... Important: regularly check on the red temperature pilot light and thermometer to establish that the storage temperature is being main-tained. The compressor runs con-tinuously Temperature is set toocold. Turn the thermostat con-trol knob to a warmer set-ting temporarily. Heavy b...
Page 26 - Clicks; Whenever the compressor switches on or off, a click can be heard.; Humming; As soon as the compressor is in operation, you can hear it humming.
26 Noises D uring Operation The following noises are characteristic of refrigeration appliances: • Clicks Whenever the compressor switches on or off, a click can be heard. • Humming As soon as the compressor is in operation, you can hear it humming. • Bubbling/Splashing When refrigerant flows into t...
Page 27 - Refrigerant
27 Technical T erminology • Refrigerant Liquids that can be used to a generate a cooling effect are known asrefrigerants. They have a relatively low boiling-point, indeed so low,that the warmth from the food stored in the fridge or freezer cancause the refrigerant to boil and vaporise. • Refrigerant...
Page 29 - GUARANTEE CONDITIONS; Standard guarantee conditions; European Guarantee
29 GUARANTEE CONDITIONS Standard guarantee conditions We, AEG-Electrolux, undertake that if within 12 months of the date of the purchase thisAEG-Electrolux appliance or any part thereof is proved to be defective by reason only offaulty workmanship or materials, we will, at our discretion repair or r...
Page 32 - Subject to change without notice
AEG Hausgeräte GmbHPostfach 1036D-90327 Nürnberg http://www.aeg.hausgeraete.de © Electrolux plc 2005 2222 737-78 - 00 - 1006 Subject to change without notice
