Page 2 - CONTENTS; Contents
Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend ...
Page 3 - SAFETY; Read carefully & keep for future reference.; General safety; check into the drum before using.
Washing drum 25 Door seal 26 Drain pump 26 Cleaning the water inlet filters 28 Frost precautions 29 Emergency emptying out 29 WHAT TO DO IF… 29 CONSUMPTION VALUES 33 TECHNICAL DATA 33 INSTALLATION INSTRUCTIONS 34 INSTALLATION 34 Unpacking 34 Positioning and levelling 36 Rubber feet kit (4055126249) ...
Page 5 - Child Safety; PRODUCT DESCRIPTION
• Plastic detergent dispensers should not remain in the drum during the drying cycle, as the plastic used is not designed to withstand the heat. If you wish to wash-through-to- dry you should use the conventional detergent dispenser drawer. • Never pull the power supply cable to remove the plug from...
Page 6 - Detergent dispenser drawer; tion phase; CONTROL PANEL
1 6 5 4 3 2 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet Detergent dispenser drawer Compartment for prewash phase or stain re - mover. The prewash detergent is added at the beginning of the wash programme. The stain remover is added...
Page 7 - Display
1 2 3 4 5 6 7 8 9 1 Programme selector dial 2 SPIN reduction button 3 AUTODRY button 4 DRYING TIME button 5 OPTION button 6 OK button 7 START/PAUSE button 8 DELAY START button 9 Display Display 9.1 9.2 9.3 9.4 9.99.8 9.7 9.6 9.5 9.1 - Spin Speed indicator, RINSE HOLD , NIGHT CYCLE - symbols 9.2 - Dr...
Page 8 - Err
If the OVERDOSAGE symbol lights up at the end of the programme, it indicates that too much detergent has been used. 9.4 - DOOR - symbol (Door locked) • This symbol indicates if the door can be opened: – the symbol is on: the door cannot be opened. The appliance is performing a washing or drying prog...
Page 9 - Acoustic signals; DAILY USE; Load the laundry
FIRST USE • Ensure that the electrical and water connections comply with the installation instruc - tions. • Remove the polystyrene block and any material from the drum. • Before the first wash, run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufactu...
Page 11 - Select the spin speed, NIGHT CYCLE or RINSE HOLD option (button 2); gramme; Programme option buttons
If you turn the programme selector dial to another programme when the machine is work - ing, the yellow pilot light of button 7 will blink 3 times and the message Err is displayed on the display to indicate a wrong selection. The machine will not perform the new selected programme. Select the spin s...
Page 12 - is not; SENSITIVE option
For the compatibility among the options and the washing programmes see chapter «Wash - ing Programmes». PREWASH option Select this option if you wish your laundry to be prewashed at 30°C before the main wash. The Prewash ends with a short spin in programmes for cotton and synthetic fabrics, where - ...
Page 13 - Altering an option or a running programme; only by resetting it
Select the START/PAUSE (button 7) To start the selected programme, press the button 7 , the corresponding red pilot light stops blinking. The DOOR symbol appears on the display to indicate that the appliance has started operat - ing and the door is locked. To interrupt a programme which is running, ...
Page 14 - tion to the water level and temperature !); At the end of the programme; Follow the below instruction to empty the water out:; Drying only
Interrupting a programme Press the button 7 to interrupt a programme which is running, the corresponding light starts blinking. Press the button again to restart the programme. Cancelling a programme Turn the selector dial to to cancel a programme which is running. Now you can select a new programme...
Page 15 - connected to the drain pipe.
By pressing Drying Time button it is also possible to dry up to 6 kg of cotton items (see the «Drying Programme » table). The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. 1. Load the laundry. 2. Select a spin cycle at the maximum spin speed...
Page 16 - USE - WASHING AND DRYING; NON-STOP programme: Washing and Automatic drying
If you need to open the door before or during the anti-crease phase or to interrupt it, press any button or turn the programme selector dial to any programme position (except O . The door can be opened immediately or after a few minutes depending on the model. (In any case do not try to open the doo...
Page 17 - Fluff in the garments
CAUTION! Do not use a dosing device/ball when carrying out a washing and drying pro - gramme. 1. Load the laundry. 2. Add detergent and fabric softener. 3. Switch the machine on: turn the selector dial to the required washing programme/fab - ric. 4. Press the relevant buttons to set the required opt...
Page 18 - WASHING PROGRAMMES; White cotton; Washing programmes
WASHING PROGRAMMES Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Fabrics Load - Type of Laundry Options Detergent Com - partment COTTONS/LINEN 95° and 60° Main wash - Rinses - Long spin at the maximum spin speedMax. load 8 kg - Reduced load 4 kg 1) White cotton (heavily o...
Page 21 - DRYING PROGRAMMES; Automatic Programmes; HELPFUL HINTS AND TIPS; Sorting out the laundry; Drying Programmes
DRYING PROGRAMMES Automatic Programmes Degree of Drying Type of Fabric Max Load EXTRA DRY Ideal for towelling material Cotton and linen (bath - robes, bath towels, etc) 4 kg CUPBOARD DRY Suitable for items to put away without iron - ing Cotton and linen (bath - robes, bath towels, etc) 4 kg CUPBOARD...
Page 22 - Ball point pen and glue:; Detergents and additives
Before loading the laundry Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or...
Page 23 - Quantity of detergent to be used; DRYING HINTS; Preparing the drying cycle; sink or into the drain pipe, even during the drying cycle.; Laundry not suitable for drying
The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme. If using liquid detergents, a programme without prewash must be selected. Your appliance incorporates a recirculation system which allows an optimal use of the c...
Page 24 - Garment labels; CARE AND CLEANING; Descaling
The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme. If using liquid detergents, a programme without prewash must be selected. Your appliance incorporates a re-circulation system which allows an optimal use of the ...
Page 28 - Cleaning the water inlet filters
Cleaning the water inlet filters If the appliance doesn't fill, it takes a long time to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..." for more details), check if the water inlet filters are blocked . ...
Page 29 - WHAT TO DO IF...; yellow
Frost precautions If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: 1. close the water tap and unscrew the water inlet hose from the tap; 2. place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and ...
Page 30 - The washing machine does not start:; What to do if...
Problem Possible cause/Solution The washing machine does not start: The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical instal -...
Page 31 - There is water on the floor:
Problem Possible cause/Solution There is water on the floor: Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use anoth - er one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see th...
Page 32 - Spinning starts late or the machine does not
Problem Possible cause/Solution Spinning starts late or the machine does not spin: The electronic unbalance detection device has cut in because the laundry is not evenly distrib - uted in the drum. The laundry is redistributed by reverse rotation of the drum. This may hap - pen several times before ...
Page 33 - CONSUMPTION VALUES; For the duration of; TECHNICAL DATA
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and pur - chase date of your machine: the Service Centre will require this information. CONSUMPTION VALUES Programme Energy consumption (KWh) Water consumption ...
Page 34 - INSTALLATION; Unpacking; has to be transported again.
Maximum Load Cotton 8 kg Maximum Dry Load Cotton Cotton Big Capacity Synthetic 4 Kg 6 Kg 3 Kg Spin Speed Maximum 1600 rpm INSTALLATION INSTRUCTIONS INSTALLATION Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that the...
Page 36 - Positioning and levelling
5. Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plas - tic plug caps supplied in the bag con - taining the instruction booklet. 7. Connect the water inle...
Page 37 - Water inlet; This appliance must be connected to a cold water supply.
Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Rubbe...
Page 38 - Water drainage; In a sink drain pipe branch.
Water-stop device The inlet hose is provided with a water stop de - vice, which protects against damage caused by water leaks in the hose which could develop due to natural ageing of the hose. This fault is shown by a red sector in the window «A» . Should this oc - cur, turn the water tap off and re...
Page 39 - joining piece is available from your local Service Centre.; ELECTRICAL CONNECTION; taking into account any other appliances in use.; Connect the machine to an earthed socket.; ENVIRONMENT CONCERNS; you purchased the product.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre. ELECTRICAL CONNECTION Information on the electrical connection is given on the rating plate on the inner edge of the appliance door. Check that your domest...
Page 40 - Packaging materials; The materials marked with the symbol are recyclable.; Ecological hints; • The machine works more economically if it is fully loaded.
Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collec - tion containers. Ecological hints To save water, energy and to h...
