Zenoah G3801EZ - Manual
Zenoah G3801EZ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – For safe operation
- Page 5 – Explanation of Symbols on the Machine
- Page 6 – Installing Guide Bar and Saw Chain
- Page 7 – Fuel and Chain Oil
- Page 8 – Operating the Engine
- Page 12 – Maintenance of Saw Chain and Guide Bar
- Page 13 – Troubleshooting Guide
- Page 15 – Limited warranty
G3801/G3801EZ
G
B
GB-1
G3801
G3801EZ
OWNER’S MANUAL
CHAIN SAW
G
B
Original Language
115 39 06-38 (007)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
G3801/G3801EZ G B GB-3 1. For safe operation WARNING This chainsaw has been especially designed for treemaintenance and should therefore only be used bytrained operators when working on trees. 1. Never operate a chain saw when you are fatigued, ill, or upset, or under theinfluence of medication that...
G3801/G3801EZ G B GB-5 2. Explanation of Symbols on the Machine The port to fuel “MIX GASOLINE” Position: Beside Fuel cap The port to fill with chain oil Position: Beside Oil cap Setting the switch to the “O” position, the engine stops immediately. Position: Beside rocker switch Starting the engine....
G3801/G3801EZ GB-6 3. Fit the chain cover to the power unit and fasten the nuts to finger tightness. 4. While holding up the tip of the bar, adjust the chain tension by turning the tensioner screw until the tiestraps just touch the bottom side of the bar rail. 5. Tighten the nuts securely with the b...
