Zanussi FLS1383W- User Manual

5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 ON/OFF button 4 “Option” buttons 5 Spin speed selector dial 6 “Mains-on” light 7 Programme selector dial 8 Door locked pilot light 9 Door opening handle 10 Filter 11 Adjustable feet Door locked pilot light The door stays...

1 Programme guide 2 On/Off button By depressing this button the machine starts operating.When depressed again, the machine stops. 3 Heavy soil button By pressing the heavy soil button, the machine will takein cold water only on programmes with a water temperature of 50°-60°-95°C (programmes B-C and ...

7 Operating Sequence Before the first wash, we recommend that you run acotton cycle at 60°C, without any laundry in themachine, to remove any manufacturing residue from thedrum and tub.Pour 1/2 a measure of detergent into the dispenserdrawer and start the machine. WASHING 4.5 KG OF WHITE COTTON AT 9...

11 Washing Hints i Do NOT overload the machine. Weigh the laundry thefirst few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 g Linen ha...

13 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...

14 Washing Programmes Degree of soil and type of laundry Description Wash programme Programme dial position Possible options Max. load NON- FAST COLOUREDS FAST COLOUREDS WHITES EXTRA PREWASH For heavy soiled cottonitems (whites andcoloureds). Fast coloured cotton orlinen fabrics, shirts,underwear, t...

15 Washing Programmes Degree of soil and type of laundry Description Wash programme Programme dial position MIXED FABRICS Possible options SPIN 650 WOOL CARE DELICATES Synthetic or mixedfabrics, underwear,coloured garments,non-shrink shirts,blouses. Specially testedprogramme for woolgarments bearing...

16 Maintenance and Cleaning Before any maintenance or cleaning is carried out youmust DISCONNECT the appliance from the electricitysupply. Descaling The water we use normally contains lime. It is a goodidea to periodically use a water softening powder in themachine. Do this separately from any laund...

17 Cleaning the filter The water drain filter A clean filter is important for the correct functioning ofthe machine, and should therefore be cleaned after everywashing programme. Open the filter door and place a container underneath tocatch any spillage. If the filter is blocked and themachine is un...

18 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling outan engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.IMPORTANT: if you call out an engineer to a fault list...

19 Symptom The door will not open Possible causes n The programme is still running. n The door lock has not yet released (the door locked pilot light is still on). n Water in the tub: the door cannot be opened if water is present in thetub. Spinning starts late or the machinedoes not spin n The elec...

20 Peace of Mind for Twelve Months Standard guarantee conditions We, Zanussi Limited undertake that if, within 12 monthsof the date of the purchase, this Zanussi appliance orany part thereof is proved to be defective by reason onlyof faulty workmanship or materials, we will, at ouroption, repair or ...

22 P0233 2 1 P0255 P0234 P0020 P0256 Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use incase the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt.Lay the machine gently o...

24 The drain hose may be extended to a maximum of 4metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of18mm. If you intend the drain hose to empty into a sink, makesure that the sink is empty and the...

26 Electrical connection Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make s...