Zanussi FJ 1054 W - Manual

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door locked light 4 Door opening handle 5 Filter 6 Adjustable feet Door locked light It stays on during the whole programme indicating thatthe door is locked.When the light goes out, the door can be opened (seepages 10-11)...

1 ON/OFF button Press this button to switch the washing machine on.Press the ON/OFF button again to switch the machineoff. 2 MAINS-ON light This light is connected to the ON/OFF button. It lightsup when you press the button, and goes out when youpress it again. 3 FABRICS button Press this button rep...

9 Operating Sequence Before the first wash, we recommend that you run acotton cycle at 60°C, without any laundry in themachine, to remove any manufacturing residue from thedrum and tub.Pour 1/2 a measure of detergent into the main washcompartment of the dispenser drawer and start themachine. 1.Load ...

12 Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 g Linen han...

14 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...

15 Washing programmes The “coloured cotton programme” at 60°C with a wash load of 5 kg is the reference programme for the data entered inthe energy label, in compliance with EEC 92/75 standards. * This data is given purely as an indication: the consumption values may vary in relation to the quantity...

16 Maintenance and Cleaning Before any maintenance or cleaning is carried out youmust DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a goodidea to periodically use a water softening powder in themachine. Do this separately from any laun...

17 If the filter is blocked and the machine is unable to drainyou will need to drain the water manually from themachine at this stage. To do this, unhook the drain hosefrom the standpipe or sink and hold the end of the hoseover a bowl on the floor. The water should drain bygravity into the bowl. Whe...

18 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without callingout an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault lis...

19 Symptom The door will not open Possible causes ● The water level is above the bottom edge of the door. ● The machine is heating the water. ● The drum is turning. The door can only be opened when the relevant light has gone out. Spinning starts late or the machinedoes not spin ● The electronic unb...

20 Guarantee Conditions Standard guarantee conditions We, Zanussi undertake that if, within 12 months of thedate of the purchase, this Zanussi appliance or any partthereof is proved to be defective by reason only offaulty workmanship or materials, we will, at our option,repair or replace the same FR...

22 Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use incase the machine is to be transported again. Using a spanner unscrew and remove the two rearbottom screws. Slide out the two plastic pins. Lay the machine gen...

24 If you intend the drain hose to empty into a sink, makesure that the sink is empty and the plug hole is notblocked. Use the plastic “U-Piece” supplied. Important Before connecting up the machine to new pipework orto pipework that has not been used for some time, runoff a reasonable amount of wate...

25 Electrical connection Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. WARNING: THIS APPLIANCE MUST BEEARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make su...