Page 2 - Contents; Guide to use the instruction book; Safety instructions
2 For the user Important safety information 3 Description of the appliance 4 The control panel 4 Before use 5 Setting the water softener 5 Rinse aid 7 Using your appliance 8 Loading your appliance 8 Adjusting the height of the upper basket 9 Use of detergent 10 Hints and tips 11 Washing programmes 1...
Page 3 - During Use; Conservation; In the interest of the environment:; Important safety information
3 Installation ● This appliance is heavy. Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way. ● Care must be taken to ensure that the appliance does not stand on the electrical supply cable. ● Any electrical work required t...
Page 5 - Ensure that the electrical and water connections; Remove all packaging from inside the appliance; Setting the water softener; To adjust the water softener; Before use
5 Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. F...
Page 6 - Filling with salt; To fill with salt, unscrew the cap of the salt
6 Filling with salt Only use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rins...
Page 7 - Rinse aid; Filling with rinse aid; Add the rinse aid until the container is completely; Adjusting the dose
7 Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, spot and streak free drying.The dispenser, which is positioned inside the door,holds about 110 ml of rinse aid, which is sufficient for16 - 40 dishwashing programmes, depending upon thedosage setting. Filli...
Page 8 - The cutlery basket; Removable knife basket; Using your appliance
8 Loading your appliance Before placing dishes in the machine, remove anyscraps of food, to avoid clogging the filters andconsequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load thedishes. The lower baske...
Page 9 - The upper basket; To move to the higher position proceed as follows:; Carefully lift both sides upwards and the allow the
9 The upper basket The upper basket is designed for plates (dessertplates, saucers, dinner plates of up to 24 cm indiameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cupracks so that water can reach all surfaces. Glasses with long stems can be placed upside downi...
Page 10 - Use of detergent; Compact detergents with enzymes
10 Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents whichare available in the following options: Finish Double Action Tablets. Each tablet has theexact amount of detergent required, simply place inthe dispenser. Finish Powde...
Page 11 - Hints and tips
11 To save energy Place dishes in the machine immediately after everymeal and wait until the dishwasher is full beforewashing. If necessary run the Rinse and Hold programme (see"Washing Programmes" chart) so that any food scrapsdo not become caked on the dishes while you arewaiting to run th...
Page 12 - Washing programmes
12 Programme Degree of soil Starting position of the programmer Required pushbuttons Recommended quantity of detergent in the dispenser in the SID Cycle description PRO21en Washing programmes Crockery, cutlery, pots and pans Crockery, cutlery, pots and pans Crockery, cutlery, pots and pans * Energy ...
Page 13 - Operating sequence
13 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Check that there is rinse aid and salt 3. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket...
Page 14 - To remove the drain filter; Cleaning the large filter; To remove the large filter; Once cleaned refit it following the above instructions; Maintenance and cleaning
14 Internal cleaning Ensure that the seals around the door, the detergentand rinse aid dispensers are cleaned regularly with adamp cloth. We recommend the use of Finish Dishwasher Cleanerevery 3 months or run a 65°C wash without dishesusing detergent. Regular use of Finish DishwasherCleaner cleans i...
Page 15 - External cleaning; Unplug the appliance and then turn off the water.; Leave the inside of the machine clean.; Frost precautions; Remove the water inlet and discharge hoses.
15 Check that the SID is not clogged with detergentresidue. If necessary rinse it under running water afterhaving removed it from the basket by twisting itanticlockwise and pulling it upwards. Fasten it back onto the support by turning it clockwise. Never use your dishwasher without the SID dispense...
Page 16 - Something not working; Symptom
16 Certain problems are due to lack of simple maintenance or oversights, which can be solved easily withoutcalling out an engineer.Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault listed below or to repair ...
Page 18 - This guarantee does not cover:; European Guarantee; Guarantee conditions
18 Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any partthereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repairor replace the same FREE OF CHARGE for labour, ...
Page 19 - Hints for test centres; Technical specifications
19 Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinseaid dispenser. IST20en Test standard EN 50242 Reference programme: Energy Save 50°C (with prewash) Load: 12 standard place settings Rinse aid selector: posit...
Page 20 - Water supply connections; Installation instructions
20 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning themachine. I...
Page 21 - Water outlet hose connection; To the sink outlet siphon, securing it if necessary
21 Water outlet hose connection The end of the drain hose can be connected in thefollowing ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide provided. 3. To a stand pipe provided with vent-hole, minimu...
Page 22 - Electrical connection; Green and Yellow
22 Electrical connection This appliance must be earthed.The manufacturer declines any responsibility should this safety measures not be observed. If the plug that is fitted to your appliance is not suitablefor the socket, it must be cut off and the appropriateplug fitted. ImportantThe wires on the m...
