Zanussi ZDF12002WA- User Manual

Page 2 - Children and vulnerable people safety

Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ...

Page 3 - Control panel

• Before you connect the appliance to new pipes or pipes not used for a long time, letthe water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. Use • This appliance is intended to be used in household and similar applications such as: – Staff kitch...

Page 4 - Programmes; Information for test institutes; Write down the product number (PNC) that is on the rating plate.

5 Half load button 6 Programme knob Indicators Description End indicator. Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme oper-ates. Programmes Programme 1) Degree of soil Type of load Programme phases Duration (min) ...

Page 5 - Adjusting the water softener

Options Half-load Activate or deactivate this option beforethe start of a programme. You cannot acti- vate or deactivate this option while a pro-gramme operates. Set this option when you want to wash a smallquantity of tableware and cookware. This option decreases the programme duration and theconsu...

Page 6 - Daily use

4. Press . • starts to flash. • and continue to flash. • The intermittent flashing of refers to the current set level,, e.g. 5 flashes +pause + 5 flashes = level 5. 5. Press again and again to change the set- ting. Each time you press the level num-ber increases. 6. To confirm the setting and deacti...

Page 8 - Important; Hints and tips; The water softener

1. To deactivate the appliance, turn the knob until the programme marker is aligned with . 2. Close the water tap. Important • Let the dishes become cold before you re- move them from the appliance. Hot dishescan be easily damaged. • First remove the items from the lower basket, then from the upper ...

Page 9 - Care and cleaning; Before maintenance, deactivate; Cleaning the filters; Before you put the filter (; Cleaning the spray arms

Care and cleaning Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms de-crease the washing results. Make a check regularly and, if necessary, cleanthem. Cleaning the filters 1 C B A 2 3 4 5 D 6 7 8 To remove...

Page 10 - Troubleshooting; Deactivate the appliance before; • The released quantity of rinse aid is too

Troubleshooting The appliance does not start or it stops duringoperation.Before you contact the Service, refer to the in-formation that follows for a solution to the prob-lem. With some problems, different indicatorsflash continuously or intermittently at thesame time to show an alarm code. Alarm co...

Page 11 - Dishes are wet; Technical information; Rating plate; Environment concerns

Stains and dry water drops on glasses anddishes • The released quantity of rinse aid is not suffi- cient. Adjust the rinse aid selector to a higherposition. • The quality of the detergent can be the cause. Dishes are wet • The programme is without a drying phase or with a low temperature drying phas...

Zanussi ZDF12002WA- User Manual

Table of Contents:

Summary

Other Zanussi Models