York YCJD18 - Manual
York YCJD18 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Johnson Controls Unitary Products; Physical and Electrical Data
- Page 3 – Outdoor Unit
- Page 5 – COOLING CAPACITY - With Air Handler Coils
- Page 7 – COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils
- Page 8 – COOLING CAPACITY - With Variable Speed Furnaces
- Page 10 – ACCESSORIES; Refer to Price Manual for specific model numbers.; HARD START KIT; to prevent rapid recycling of the compressor.; ROOM THERMOSTATS; - A wide selection of compatible; TYPICAL INSTALLATION; Model
- Page 11 – COOLING PERFORMANCE DATA
- Page 18 – NOTES
TECHNICAL GUIDE
SPLIT-SYSTEM
AIR CONDITIONERS
13 SEER – R-410A
MODELS:
YCJD18 THRU 60
(1.5 THRU 5 NOMINAL TONS, 1 PHASE)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ahridirectory.org
LISTED
ISO 9001
Certified Quality
Management System
364834-YTG-C-0708
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 13 SEER Series condensing unit is the outdoor part of a
versatile system of air conditioning. It is designed to be cus-
tom-matched with one of UPG’s complete line of evaporator
sections, with each serving a specific function. Matching Air
Handlers are available for upflow, downflow, or horizontal
applications to provide a complete system. Electric Heaters
are available, if required. Add-on coils are available for use
with upflow, downflow, or horizontal furnaces and air han-
dlers.
WARRANTY
Single Phase Units:
5-year limited parts warranty.
10-
year limited compressor warranty.
FEATURES
•
QUALITY CONDENSER COILS -
The coil is constructed
of aluminum microchannel tubing and enhanced aluminum
fins for increased efficiency and corrosion protection.
•
PROTECTED COMPRESSOR -
The compressor is inter-
nally protected against high pressure, temperature, and
externally by a factory installed high pressure switch. This
is accomplished by the simultaneous operation of high
pressure relief valve and a temperature sensor which pro-
tects the compressor if undesirable operating conditions
occur. A liquid line filter-drier further protects the compres-
sor.
•
DURABLE FINISH -
The cabinet is made of pre-painted
steel. The pre-treated galvanized steel provides a better
paint to steel bond, which resists corrosion and rust creep.
Special primer formulas and matted-textured finish insure
less fading when exposed to sunlight.
•
LOWER INSTALLED COST -
Installation time and costs
are reduced by easy power and control wiring connec-
tions. Available in sweat connect models only. The unit
contains enough refrigerant for matching indoor coils and
15 feet of interconnecting piping. The small base dimen-
sion means less space is required on the ground or roof.
•
TOP DISCHARGE -
The warm air from the top mounted
fan is blown up away from the structure and any landscap-
ing. This allows compact location on multi-unit applica-
tions.
•
LOW OPERATING SOUND LEVEL -
The upward air flow
carries the normal operating noise away from the living
area. The rigid top panel effectively isolates any motor
sound. Isolator mounted compressor and the rippled fins
of the condenser coil muffle the normal fan motor and
compressor operating sounds.
•
LOW MAINTENANCE -
Long life permanently lubricated
motor-bearings need no annual servicing.
•
EASY SERVICE ACCESS -
Fully exposed refrigerant con-
nections, and a single panel covering the electrical con-
trols make for easy servicing of the unit.
•
SECURED SERVICE VALVES -
Secured re-usable ser-
vice valves are provided on both the liquid and vapor
sweat connections for ease of evacuating and charging.
•
U.L. and C.U.L. listed -
approved for outdoor application.
Certified in accordance with the Unitary Small Equipment cer-
tification program, which is based on ARI Standard 210/240.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
364834-YTG-C-0708 2 Johnson Controls Unitary Products All dimensions are in inches. They are subject to change without notice. Certified dimensions will be provided upon request. Physical and Electrical Data MODEL YCJD18 S41S1(H) YCJD24 S41S1(H) YCJD30 S41S1(H) YCJD36 S41S1(H) YCJD42 S41S1(H) YCJD48...
364834-YTG-C-0708 Johnson Controls Unitary Products 3 Additional R-410A Charge / Orifice Size for Various Matched Systems Outdoor Unit YCJD18 S41S1(H) YCJD24 S41S1(H) YCJD30 S41S1(H) YCJD36 S41S1(H) YCJD42 S41S1(H) YCJD48 S41S1(H) YCJD60 S41S1 Required Orifice or TXV 1,2 0.048 / 902 0.055 / 902 0.06...
364834-YTG-C-0708 Johnson Controls Unitary Products 5 COOLING CAPACITY - With Air Handler Coils UNIT MODEL AIR HANDLER COIL MODEL 1 COOLING MODEL W RATED CFM NET MBH SEER EER TOTAL SENS. 13 SEER AC WITH MA YCJD18S41S1(H) MA08B 17 FC/MC18B 600 17.5 12.9 13.00 11.00 YCJD24S41S1(H) MA08B 17 FC/MC36B 80...
