Yamaha PSR-510 - Manual

Table of Contents:

• Page 2 – C A N A D A; SPECIAL MESSAGE SECTION
• Page 3 – Contents
• Page 6 – Taking Care of Your PortaTone; Do not expose the instrument to the following
• Page 7 – Power Supply; according to the power source you intend to use.; Preparation; When the batteries fail, replace them as follows:
• Page 8 – Using Headphones Or an External Sound System; An optional Yamaha FC4 or FC5 footswitch can be plugged into the; The Music Stand
• Page 9 – Press the DEMO [SONG #] button a few times until the number of the; desired demo song appears on the MULTI DISPLAY.; Before playing the demo turn the power ON by pressing the POWER
• Page 10 – Basic Editing Procedure; the one that best suits the parameter you have selected:
• Page 11 – — simply release the button when the desired value has been reached.; The number buttons — to the right of the [; To select a voice, for example, choose one of the 128 voices — num-; ] button is used to switch between positive and negative values; ” appears before negative values on the MULTI; When selecting voice numbers the [
• Page 12 – Selecting & Playing the Voices; Orchestration; There are actually a number of variations on; Single Modes; The four available parts are turned on and off by
• Page 13 – Dual Mode; The PSR-510 allows four different split modes,; Split Modes; You can switch back to either of the single modes
• Page 14 – Voice Assignment; You don’t need to do this if the [VOICE SELECT] indicator is already; Referring to the VOICE list printed on the PSR-510 panel, use the [; When entering voice numbers higher than 99, use the [
• Page 15 – Volume
• Page 16 – DSP Depth; ”, for example, would place the sound between center; Press the VOICE control section [DSP DEPTH] button. The current; Pan; Use the ORCHESTRATION [EDIT] button to select the part you want; the selected part will appear on the MULTI DISPLAY.
• Page 17 – Auto Harmony; Press the [HARMONY] button so that its indicator lights. This turns; The Harmony Types; Use the [HARMONY] button to turn Auto Harmony ON or OFF. Auto
• Page 18 – Effects; Press the [EFFECT] button so that its indicator lights. This turns ON; Press the VOICE control section [EFFECT TYPE] button. The number; of the currently selected effect will appear on the MULTI DISPLAY.; The Effects; Use the [EFFECT] button to turn the effect ON or OFF. The selected
• Page 19 – Keyboard Percussion; Press the [KEYBOARD PERCUSSION] button so that its indicator; The Percussion Kits
• Page 20 – Pitch Bend; The PITCH BEND wheel to the left of the keyboard allows the note; Setting the Pitch Bend Range; semitone to; To set the pitch bend range, roll the PITCH BEND wheel all the way in; Release the PITCH BEND wheel when you’ve set the required pitch; Sustain
• Page 21 – Overall Control; Split Point Change; make sure that the [AUTO ACCOMP] indicator is off before proceeding.; As with all other parameters, you can also use the [
• Page 22 – Transpose; Tuning
• Page 23 – DSP Type; number of the current DSP type will appear on the MULTI DISPLAY.; The DSP Types
• Page 24 – Touch Sensitivity; current sensitivity setting will appear on the MULTI DISPLAY.; Use the [TOUCH RESPONSE] button to turn touch sensitivity ON or; turns touch sensitivity ON.
• Page 25 – When you press the [STYLE SELECT] button the currently selected; style number will appear on the MULTI DISPLAY.; AUTO ACCOMPANIMENT; Selecting a Style
• Page 26 – Setting the Auto Accompaniment Split Point; Auto Accompaniment Fingering; When you press the [FINGERING] button the currently selected Auto; Accompaniment fingering number will appear on the MULTI DISPLAY.
• Page 27 – The Chord 1 mode is ideal if you already know how to play chords on a; Example for “C” chords
• Page 29 – Tempo Control; Press the OVERALL CONTROL section [TEMPO] button. The current
• Page 30 – Accompaniment Control; The [START/STOP] button starts the selected accompaniment style; The Beat Indicator; The three BEAT indicator dots along the top of the MULTI DISPLAY
• Page 32 – Accompaniment Structure Diagram; Start Playback with a Fade-in; You can start the accompaniment with a fade-in by pressing the; Fade-out to stop the accompaniment during Playback
• Page 33 – Accompaniment Volume; Press the AUTO ACCOMPANIMENT control section [ACCOMP VOL-; The Track Buttons; The PSR-510 Auto Accompaniment system includes eight; Here’s how the tracks are normally used:
• Page 34 – Re-voicing the Tracks
• Page 35 – Repeat steps 1 and 2 to re-voice all the tracks you want to change.
• Page 36 – One Touch Setting; Pressing the [ONE TOUCH SETTING] button again turns OFF the; One Touch Setting function.; The One Touch Setting function recalls the following settings:
• Page 37 – The panel settings listed above can be stored to any one; Registration Memory
• Page 38 – The settings stored to a REGISTRATION MEMORY button; The [FREEZE] button can be used to “freeze” the VOICE or
• Page 39 – CUSTOM ACCOMPANIMENT:; Record Functions; Song Memory
• Page 40 – Realtime Accompaniment Track Recording; Press the SONG MEMORY section [ACCOMP] track button while holding
• Page 41 – Recording can also be started by pressing the ACCOMPANIMENT CON-; Stop recording by pressing the [ACCOMP] track button. Recording can
• Page 42 – Realtime Melody Track Recording; Select the voice you want to record with (the R1 and R2 voices can be; Recording will begin as soon as you play a note on the keyboard or; Stop recording by pressing the TRACK button of the melody track be-
• Page 43 – Accompaniment And Melody Playback; Any number of MELODY tracks and/or the ACCOMP track can be; Playback will begin as soon as the SONG [PLAY/STOP] button is; Play along on the keyboard if you like. You can also change the tempo
• Page 44 – Press the SONG [RESET] button to go directly to the first measure of; Record Or Play from a Specified Measure; If the measure number is not currently shown on the MULTI DISPLAY,; from the specified measure number.
• Page 45 – The Multi Pads; ply by selecting the appropriate PAGE MEMORY.; Realtime Recording; Select the voice you want to record on the MULTI PADS. Only the [R1]
• Page 46 – Playback; Simply tap any of the MULTI PADS at any time to play back the data; Press the MULTI PAD button being recorded, the MULTI PADS
• Page 47 – Custom Accompaniment; Realtime Custom Accompaniment Recording
• Page 48 – Press the AUTO ACCOMPANIMENT section TRACK button correspond-
• Page 49 – Using a Custom Accompaniment; To use a custom accompaniment, simply select the PAGE MEMORY in; Stop recording by pressing the TRACK button being recorded or the
• Page 50 – Step Recording; Step Size Settings
• Page 51 – Press the [GATE TIME] button and the current gate time will appear on; Gate Time Settings; To Enter a Rest ...
• Page 52 – to enter a variety of notes:; Example; Repeat steps 2, 3, and 4 until the required number of notes has been en-; Stop recording by pressing the track or MULTI PAD button being re-
• Page 53 – Editing Functions; Quantization; Confirm or Cancel the Quantize Operation
• Page 54 – Clearing Tracks; Use the [MEASURE #] button to set the first measure to be cleared; Rewritable Data; Changing the Recorded Settings; Only if you will be rewriting Song Memory settings, use the [MEAS-
• Page 55 – For the Song Memory or Multi Pads use the [PLAY/STOP] button to; If you make any changes during rewrite standby — i.e. after engaging
• Page 56 – Page Memory; PAGE MEMORY Data
• Page 57 – Although the PSR-510 features a built-in “sequencer” (the SONG; The PSR-510 is capable of receiving the same MIDI data, so a second; MIDI
• Page 58 – MIDI Bulk Dump; Connect the PSR-510 MIDI OUT terminal to the MIDI IN terminal of; Select the PAGE MEMORY number you want to transmit (page 54).; button to cancel and return to the VOICE SELECT mode.
• Page 59 – The Page Reset Function; When “cL” appears to the right of the page number on the MULTI DIS-; Select the PAGE MEMORY number you want to copy to a different; Page Copy
• Page 60 – MIDI Reception Modes; Channel Reception Modes; Mode “0”
• Page 61 – Clock Mode
• Page 62 – MIDI Transmission; MIDI Transmit Channels
• Page 63 – Voice & Polyphony List; Appendix
• Page 64 – Style List
• Page 67 – Reset Procedures & Page Memory Default Settings; System Reset; the VOICE SELECT mode.; Press the POWER switch to turn the PSR-510 power OFF.
• Page 68 – Page Memory Default Settings
• Page 69 – Troubleshooting
• Page 72 – Liste des kits de percussion / Lista de juegos de percusión
• Page 73 – MIDI Implementation Chart / Implementierungstabelle / Table; MIDI Implementation Char t
• Page 74 – d’implémentation / Gráfico de implememtación
• Page 75 – GM System Level 1