Yamaha DM2000 - User Manual

Minimum System Requirements 2 Studio Manager—Owner’s Manual Minimum System Requirements For Windows Listed below are the minimum system requirements for a PC to run each item of software supplied on the CD-ROM. Studio Manager for DM2000 • A 433 MHz or faster Intel Pentium or Celeron processor • At l...

3 Chapter 1—Getting Started Studio Manager—Owner’s Manual • Display resolution of 1024 x 768 pixels, 256 colors (1280 x 1024 pixels, 32,000 colors recom-mended) • Mac OS 8.6 to 9.2.2 (Mac OS X not supported) • OMS 2.3.3 or later Note that in OMS MIDI Setup, “Run in Background” must be turned on. Car...

Software Installation for Windows 4 Studio Manager—Owner’s Manual USB MIDI Driver To operate the DM2000 from your computer via USB, you’ll need to install the USB MIDI driver. This software transfers MIDI data back and forth between Studio Manager and the DM2000 via USB. For Windows 98/Me, see the n...

Software Installation for Windows 6 Studio Manager—Owner’s Manual 8 Click Next. After installation is complete, the window appears as shown below. 9 Click Finish. The driver is installed. Installing on a Windows 2000 system 1 Turn on your PC and use the “Administrator” account to log into Windows 20...

7 Chapter 1—Getting Started Studio Manager—Owner’s Manual Installing on a Windows XP system 1 Turn on your PC. 2 Click Start, Control Panel. If the Control Panel is displayed as shown, click “Switch to classic view” in the upper left of the window. All control panels and icons are displayed. 3 Selec...

Software Installation for Macintosh 8 Studio Manager—Owner’s Manual 3 Follow the on-screen directions to install the software. A YAMAHA folder is created in C:\Program Files (the default location). The files for Card Filer are created inside that folder. Refer to “Card Filer Manual.pdf ” for informa...

11 Chapter 1—Getting Started Studio Manager—Owner’s Manual Setting up OMS OMS Studio Setup files for the DM2000 are supplied on the included CD-ROM. The setup files are used for setting up OMS when using the serial or USB ports. 1 Turn off the DM2000 and use a USB cable to connect the USB port of th...

Connecting to the DM2000 12 Studio Manager—Owner’s Manual The OMS studio setup is complete. 1 Start OMS Setup and choose “New Setup” from the File menu. The OMS Driver Search dialog appears. 2 Deselect “Modem” and “Printer,” and click Search. If successful, the USB-MIDI device is displayed in the OM...

13 Chapter 1—Getting Started Studio Manager—Owner’s Manual Starting Studio Manager For Windows, click the “Start” button and select Programs, YAMAHA Studio Manager, DM2000, Studio Manager for DM2000. For Mac, open the Studio Manager folder and double-click “YAMAHA Studio Manager for DM2000.” Studio ...

Using Studio Manager Online & Offline 14 Studio Manager—Owner’s Manual Shown below left is the Mac version of the dialog, and below right is the Windows version. Using Studio Manager Online & Offline When Studio Manager is started, it opens a new Session using its default settings and checks...

15 Chapter 2—Console Window Studio Manager—Owner’s Manual 2 Console Window The Console window is Studio Manager’s main window and opens when Studio Manager is started. It provides an overview of the mixer channels, and most major functions can be operated from here. The window is divided into the Ch...

Input Channels 16 Studio Manager—Owner’s Manual Input Channels An Input Channel from the Console window is shown below. A SOURCE parameter This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears. B Bus Out routing buttons...

17 Chapter 2—Console Window Studio Manager—Owner’s Manual P Delay Time This parameter is used to set the delay time of the Delay function. Delay times can be set by dragging. Q Channel number Displays the Channel number of the channel. R AUX section These controls are used to set the levels of the 1...

Master Section 18 Studio Manager—Owner’s Manual Master Section The Master Section is situated on the right side of the Console window. A ONLINE/OFFLINE status indicator This indicator shows whether Studio Manager is online or offline. See “Using Studio Manager Online & Offline” on page 14 for mo...

19 Chapter 2—Console Window Studio Manager—Owner’s Manual Master Section Meters If the PAN CONTROL is set to “SURR” (Surround mode), the Meters display the levels of the Bus Outs used for surround processing. Shown on the right are how the Meters appear in 3-1 and 5.1 Surround modes. In 3-1 Surround...

Master Layer Channels 20 Studio Manager—Owner’s Manual Master Layer Channels When the Master Layer is selected in the Master Section, the Bus Outs, Aux Sends, and Matrix Sends can be selected. A Bus Out is shown below. Aux Sends and Matrix Sends appear the same except that they do not have a STEREO ...

21 Chapter 2—Console Window Studio Manager—Owner’s Manual Remote Layer Channels When a Remote Layer is selected in the Master Section, Remote Channels can be selected. A Channel number Displays the Channel number of the channel. B SELECT button This button is used to select the Remote Channel. C ON ...

Selected Channel Window 22 Studio Manager—Owner’s Manual 3 Selected Channel Window To open the Selected Channel window, choose Selected Channel from the Windows menu. The Selected Channel window is used for displaying and editing a single channel in detail. Its content varies depending on the select...

Bus Outs 24 Studio Manager—Owner’s Manual I INSERT section This section contains the parameters for the currently selected Input Channel’s Insert. The INSERT button turns the Insert on and off. The OUT and IN parameters are used to select the channel’s Insert Out and Insert In, and the POSITION para...

25 Chapter 3—Selected Channel Window Studio Manager—Owner’s Manual D Bus Out Routing/Pan/Level section This section contains the controls for the currently selected Bus Out’s routing, pan, and level functions. The TO STEREO button turns on and off the Bus to Stereo routing, and the rotary controls a...

27 Chapter 3—Selected Channel Window Studio Manager—Owner’s Manual Stereo Out The Selected Channel window for the Stereo Out is shown below. Note that this window cannot be opened from the Windows menu if a Remote Layer is selected. A CHANNEL SELECT section Channels can be selected by clicking the C...

Matrix Sends 28 Studio Manager—Owner’s Manual Out and Insert In, and the POSITION parameter is used to specify the Insert’s position in the channel’s signal path. G FADER GROUP/MUTE GROUP section This section contains the buttons for assigning the Stereo Out to the Fader Groups and Mute Groups. Matr...

29 Chapter 3—Selected Channel Window Studio Manager—Owner’s Manual F DELAY section This section contains the controls for the currently selected Matrix Send’s Delay function. The rotary control is used to set the delay time, and the ON button turns the Delay function on and off. G Matrix Send Level ...

Patch Editor Window 30 Studio Manager—Owner’s Manual 4 Patch Editor Window To open the Patch Editor window, choose Patch Editor from the Windows menu. The Patch Editor window’s five pages are used to patch Inputs, Outputs, Inserts, Direct Outs, and Effects. Pages can be selected by clicking the tabs...

31 Chapter 4—Patch Editor Window Studio Manager—Owner’s Manual G LIBRARY button This button is not used in Version 1.0 of Studio Manager for DM2000. H Patch grid This grid is used to patch input ports to the Input Channels. To patch, click a square in the grid that is aligned with an input port and ...

Insert Patch Page 32 Studio Manager—Owner’s Manual G Patch grid This grid is used to patch the Output signals to the output ports. A red dot indicates that a connection is made. Insert Patch Page A Insert Patch page tab This tab is used to select the Insert Patch page. B Channel IDs This column disp...

33 Chapter 4—Patch Editor Window Studio Manager—Owner’s Manual Effect Patch Page A Effects Patch page tab This tab is used to select the Effect Patch page. B Effects Processors #1 and #2 inputs These parameters are used to select sources for the inputs of Internal Effects processors #1 and #2. C Lib...

Direct Out Patch Page 34 Studio Manager—Owner’s Manual Direct Out Patch Page A Direct Out Patch page tab This tab is used to select the Direct Out Patch page. B Channel IDs This column displays the Channel IDs. C Long Channel names This column displays the Long Channel names, which can be edited her...

35 Chapter 5—Surround Editor Window Studio Manager—Owner’s Manual 5 Surround Editor Window To open the Surround Editor window, choose Surround Editor from the Windows menu. The Surround Editor window displays the surround controls for the selected Input Chan-nel. A Channel Select section This sectio...

GEQ Editor Window 36 Studio Manager—Owner’s Manual 6 GEQ Editor Window To open the GEQ Editor window, choose GEQ Editor from the Windows menu. The GEQ Editor window displays the controls of the GEQs. A MODULE parameter This parameter is used to select a GEQ. B INSERT parameter This parameter is used...

37 Chapter 7—Timecode Counter Window Studio Manager—Owner’s Manual 7 Timecode Counter Window To open the Timecode Counter window, choose Timecode Counter from the Windows menu. The Timecode Counter window displays the DM2000’s timecode in the same format as that visible on the DM2000 Automix Main pa...

Keyboard Shortcuts 38 Studio Manager—Owner’s Manual 8 Keyboard Shortcuts The following table shows Studio Manager’s keyboard shortcuts. Shortcut Action Windows Mac File Menu Ctrl+N Command- N Creates a new Session. Ctrl+O Command- O Opens an existing Session. Ctrl+S Command -S Saves the Session curr...

39 Index Studio Manager—Owner’s Manual Index A AUTO button 17 Aux Send levels setting 17 , 23 Aux Sends Console window view of 20 Selected Channel view of 25 Aux Sends, selecting pre or post 23 B Bus Out, routing 16 , 23 Bus Outs Console window view of 20 Selected Channel view of 24 Bus to Stereo bu...

SOFTWARE LICENSING AGREEMENT 40 Studio Manager—Owner’s Manual SOFTWARE LICENSING AGREEMENT The following is a legal agreement between you, the end user, and Yamaha Corporation (“Yamaha”). The enclosed Yamaha software program is licensed by Yamaha to the original purchaser for use only on the terms s...

STUDIO MANAGER for Owner’s Manual V923450 R0 1 IP 44 02 01 350 AP Printed in Japan Keep This Manual For Future Reference. YAMAHA CORPORATION Pro Audio & Digital Musical Instrument Division P.O. Box 3, Hamamatsu, 430-8651, Japan