Xantrex 976-0212-01-01 Rev A - Manual
Xantrex 976-0212-01-01 Rev A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The LED indicator does; not; flash during the charge mode if the inverter is
- Page 3 – Charger Mode Messages; Absorption Charging; Absorption; Float Charging; When the charger is in Float mode, the screen displays; Equalizing Charging
- Page 4 – Equalizing
This errata applies to the RV Series Remote Control Owner’s Manual (Document
Part Number 975-0210-01-01 Revision A).
The following correction applies throughout the manual:
•
The Charge and Batt. Full LED indicators are orange (not yellow).
Charge LED Indicator
The Charge LED indicator table on page 27 has the following corrections:
•
The Charge LED indicator is solid during absorption and float charging (not
flashing).
•
The Charge LED indicator is flashing during equalize charging (not fast
flashing).
Errata to the RV Series Remote
Control Owner’s Manual
Errata
RC/GS
976-0212-01-01 Rev A
Green
Orange
Orange
Red
Inverter
Charge
Batt. Full
Error
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
RC/GS 2 976-0212-01-01 Batt. Full LED Indicator The Batt. Full LED indicator table on page 28 has the following correction:• The Batt. Full indicator LED is solid when the battery is charged 90% or higher (not flashing). Inverter Mode Messages The “Note” callout on page 34 of this section has the fo...
Errata 976-0212-01-01 3 Charger Mode Messages The following subsections of “Charger Mode Messages” have corrections. Absorption Charging “Absorption Charging” on page 35 has the following corrections:• In Absorption mode, the Charge LED indicator is solid (not flashing). • When the battery reaches 9...
RC/GS 4 976-0212-01-01 The following text replaces the first paragraph under “Equalizing Charging” on page 36. To activate Equalize mode, press and hold the Settings button (right arrow) until the screen clears and Equalizing appears (approximately 6 seconds). The Charge LED indicator flashes approx...
