Xantrex 200 - Manual

Important Safety Instructions iv 975-0057-01-01 - CAUTION Do not connect any AC appliance with the neutral conductor connected to ground to the XPower Powerpack 400 and XPower Powerpack 400 Plus . CAUTION Do not expose the XPower Powerpack 400 and XPower Powerpack 400 Plus to temperatures over 104 °...

Important Safety Instructions 975-0057-01-01 v WARNING: Heated surface Ensure at least 2" (5 cm) air space is maintained on all sides of the XPower Powerpack 400 and XPower Powerpack 400 Plus . During operation, keep away from materials that may be affected by high temperatures such as blankets,...

Important Safety Instructions vi 975-0057-01-01 WARNING: Fire hazard The jump-start feature is designed for short term operation only—less than 4 seconds. Operating the jump-start feature for more than 4 seconds may cause damage to the unit. Allow the XPower Powerpack 400 and XPower Powerpack 400 Pl...

Important Safety Instructions 975-0057-01-01 vii Precautions When Working With Batteries 1. Follow all instructions published by the battery manufacturer and the manufacturer of the equipment in which the battery is installed. 2. Make sure the area around the battery is well-ventilated.3. Never smok...

xi Contents Important Safety Instructions Warnings and Cautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - iiiPrecautions When Working With Batteries - - - - - - - - - - - - - - - viiPrecautions for Using Rechargeable Appliances - - - - - - - - - - - ix 1 Introduction About the XPower P...

xii 975-0057-01-01 3 Operation Operating Conditions and Guidelines - - - - - - - - - - - - - - - - - 3–1Choosing a Location - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–2Using XPower Powerpack for the First Time - - - - - - - - - - - - 3–3 Recharging with the AC Charger - - - - - - - ...

975-0057-01-01 xiii Replacing the Battery - - - - - - - - - - - - - - - - - - - - - - - - - 4–8 Replacing the Incandescent Light - - - - - - - - - - - - - - - - - - - -4–11Replacing the External Fuse - - - - - - - - - - - - - - - - - - - - - - - -4–11 5 Troubleshooting Common Problems - - - - - - - ...

1-1 1 Introduction About the XPower Powerpack Easy-to-use and designed for years of reliable service, the XPower Powerpack can run many AC appliances and 12 V DC appliances whenever you need power for work or play, at home or on the road. XPower Powerpack : • Powers 115 V AC appliances • Powers 12 V...

Introduction 1-2 975-0057-01-01 Low Battery Protection Low battery protection protects the internal battery from excessive discharge and possible damage. When the AC Outlet On/Off switch is turned on, an audible alarm alerts you when the internal battery is nearly discharged (11.0 V DC) and the unit...

2-1 2 Features Chapter 2 describes the main features of the XPower Powerpack . We recommend that you familiarize yourself with these features before operating the unit. Materials List Your XPower Powerpack package includes these items: ❐ XPower Powerpack 400 or XPower Powerpack 400 Plus ❐ Owner’s Gu...

Features 2-2 975-0057-01-01 XPower Powerpack Features Front Panel Detail XPower Powerpack Features Feature Description 1 DC Power Socket can: • Power 12 V DC auto, RV or marine appliances• Recharge XPower Powerpack from a 12 V outlet in a vehicle using the DC Charging Cable. 2 2 AC Outlets are stand...

Features 2-6 975-0057-01-01 Left Side View Feature Description 1 5 W incandescent light illuminates for about 30 hours when the battery is fully charged. 2 Light On/Off Switch 3 Jump-Start Cable Port supplies high power DC current. The cables connect to the Jump-Start Cable Port when jump-starting a...

XPower Powerpack Features 975-0057-01-01 2-7 Storage Compartment XPower Powerpack 400 Plus shown Feature Description 1 AC Charger lets you recharge the XPower Powerpack from a standard AC wall outlet and can only be used to recharge the internal battery of the XPower Powerpack . Can be stored in AC ...

Features 2-8 975-0057-01-01 Accessories Feature Description 1 Detachable heavy-duty jump-start cables 2 DC Charging Cable lets you recharge the XPower Powerpack from a 12 V system in a car, SUV, RV or a boat. This can be stored in the storage compartment. 3 Accessory bag Not Shown Nozzle packet ( XP...

3-1 3 Operation Chapter 3 explains how to operate the XPower Powerpack efficiently. This chapter covers:• Recharging the XPower Powerpack for first time use • Using the built in light • Operating AC appliances and 12 V DC appliances • Jump-starting a vehicle’s engine • Connecting to an external batt...

Operation 3-2 975-0057-01-01 Choosing a Location The XPower Powerpack should be operated only in a location that meets these requirements: : CAUTION The XPower Powerpack is not intended for use as a UPS (Uninterruptible Power Supply). WARNING: Fire or explosion The XPower Powerpack contains componen...

Using XPower Powerpack for the First Time 975-0057-01-01 3-3 Using XPower Powerpack for the First Time n Recharging with the AC Charger Recharging with the AC Charger is a true “plug-in-and- forget” charging method. We recommend leaving the AC Charger connected when the XPower Powerpack is not in us...

Operation 3-4 975-0057-01-01 Using the light The XPower Powerpack has a built in incandescent light which will operate for about 30 hours before the unit needs to be recharged. The ON/OFF switch is located beneath the light. The light can be adjusted up and down by pushing against the top or bottom ...

Operating AC Appliances 975-0057-01-01 3-5 Some appliances may be difficult or impossible to operate from the XPower Powerpack . They may have high surge requirements or should not be run from the XPower Powerpack . See “High Surge Appliances” on page 3–6 and “Trouble Appliances” on page 3–6 . Run T...

Operation 3-6 975-0057-01-01 High Surge Appliances The wattage rating of AC appliances is the average power used by the appliance. Appliances such as televisions, computer monitors and appliances with motors consume much more power than their average rating when they are first switched on.Although X...

Operating AC Appliances 975-0057-01-01 3-7 Operating Several Appliances at Once You can run several AC appliances if the total rating of all the appliances (in watts) does not exceed 320 W. You can run appliances using an AC power bar.Run time, however, will decrease accordingly with the number of a...

Operation 3-8 975-0057-01-01 Operating 12 V DC Appliances The XPower Powerpack can operate 12 V DC auto, RV, marine, or other portable appliances that draw 12 A or less from a 12 V DC power outlet or from a vehicle’s lighter socket. CAUTION Equipment damage The DC Power Socket does not automatically...

Operating 12 V DC Appliances 975-0057-01-01 3-9 Typical 12 V DC appliances that can be used on the XPower Powerpack are listed in Table 3-2 . To operate a 12 V DC appliance: 1. Open the protective cover on the left side of the XPower Powerpack . 2. Plug the 12 V DC appliance into the DC power socket...

Operation 3-10 975-0057-01-01 Jump-Starting a Vehicle’s Engine You can use the XPower Powerpack to jump-start a vehicle or boat engine that has a 12 V starting battery using the supplied Jump-Start Cables. WARNING: Fire hazard Never allow cables’ red and black clamps to touch each other or another c...

Operation 3-12 975-0057-01-01 8. Remove the red positive (+) clip and then the black negative (–) clip from the vehicle’s battery terminal. 9. Remove the cables from the Jump-Start Cable Port. Using the Air Compressor: XPower Powerpack 400 Plus WARNING: Fire hazard The jump-start feature is designed...

Using the Air Compressor: XPower Powerpack 400 Plus 975-0057-01-01 3-13 Over-Temperature Safety Protection It is recommended that you follow the warnings and turn the compressor off for 10 minutes after every 10 minutes of operation. However, the XPower Powerpack 400 Plus is equipped with an over-te...

Operation 3-14 975-0057-01-01 Inflating Tires Table 3-3 Pressure Specifications for Common Items WARNING: Risk of personal injury or damage to equipment Never leave the compressor unattended once it has switched itself off due to overheating. It will turn on again and continue inflating when its int...

Using the Air Compressor: XPower Powerpack 400 Plus 975-0057-01-01 3-15 To inflate your vehicle, motorcycle, or bicycle tires: 1. Place the valve connector securely on the tire valve stem, push it as far as possible to allow normal airflow, and close the thumb latch. If necessary, use a supplied noz...

Operation 3-16 975-0057-01-01 To inflate small sports equipment: 1. Place the valve connector fully on or into the valve receptacle on the item. Go to Step 4.ORIf necessary, use a supplied nozzle adaptor. 2. Choose the appropriate nozzle adaptor, insert the nozzle adaptor into the valve stem and clo...

Connecting to an External Battery 975-0057-01-01 3-17 Connecting to an External Battery You can extend battery operating times by connecting the XPower Powerpack to a larger external battery. For example, an external 60 Ah battery gives approximately four times the operating time of the XPower Power...

Operation 3-18 975-0057-01-01 To connect the XPower Powerpack to an external battery using the jump-start cables: 1. Connect the cables to the Jump-Start Cable Port on the left side of the XPower Powerpack . 2. Connect the red positive (+) clip of the cables to the red positive (+) terminal of the e...

4-1 4 Maintenance Chapter 4 provides information on maintaining your internal battery, recharging options for the internal battery, and replacing user-replaceable parts.Routine maintenance is required to keep your XPower Powerpack operating properly. Occasionally clean the exterior of the unit with ...

Maintenance 4-2 975-0057-01-01 s. Recharging the XPower Powerpack Battery To check the battery’s charge level, press the Display Function button. You can recharge the battery using:• the fully automatic “plug-in-and-forget” AC Charger. • the DC Charging Cable to recharge from your vehicle as you dri...

Recharging the XPower Powerpack Battery 975-0057-01-01 4-3 Recharging with the AC Charger Recharging with the AC Charger is a true “plug-in-and- forget” charging method. To recharge with the AC Charger: 1. Disconnect any 12 V DC appliance and turn the light switch to Off. 2. Turn the AC Outlet On/Of...

Maintenance 4-4 975-0057-01-01 Once the battery is fully charged, the charging voltage and current automatically reduces to a maintenance level and the XPower Powerpack may be left permanently connected to the AC Charger. If your utility power is interrupted, the charging process automatically resta...

Recharging the XPower Powerpack Battery 975-0057-01-01 4-5 To recharge the XPower Powerpack while you drive using the DC Charging Cable: 1. While the vehicle engine is running, plug one end of the DC Charging Cable into the DC Power Socket of the XPower Powerpack . 2. Plug the opposite end of the DC...

Replacing the Internal Battery 975-0057-01-01 4-7 Recharging From a Solar Panel Small, unregulated 12 V solar panels rated to produce a maximum of 2.5 A (or 30 W) can be used to charge the XPower Powerpack through the Charger Input Socket. You will need to purchase a standard 5.5 mm OD x 2.5 mm (0.2...

Maintenance 4-8 975-0057-01-01 Obtaining a Replacement Battery Replacement batteries are available from stores that specialize in and have a selection of lead acid, AGM (Absorbed Glass Mat) batteries.Refer to Table 4-1 for a listing of batteries approved for use with the XPower Powerpack : Replacing...

Replacing the Internal Battery 975-0057-01-01 4-9 Before attempting to replace the internal battery, make sure you:• Disconnect any charging cables, 12 V DC appliances, and AC appliances from the XPower Powerpack . • Turn off the AC Outlet On/Off switch and turn off the light switch. • Remove the ju...

Replacing the Incandescent Light 975-0057-01-01 4-11 7. On the XPower Powerpack , replace the battery cover and the four fasteners. 8. Dispose of the old battery in an environmentally responsible manner. Replacing the Incandescent Light To replace a light bulb:1. Turn the light switch off.2. Unscrew...

5-1 5 Troubleshooting Troubleshooting will help you identify the common problems than can occur with the XPower Powerpack . Read this chapter before calling Customer Service.If you cannot solve the problem with the XPower Powerpack , record the information asked for on “Information About Your System...

Troubleshooting 5-2 975-0057-01-01 • Try a different TV. Different models vary considerably in their susceptibility to interference. Troubleshooting Reference WARNING: Electric shock hazard Do not remove the cover of the XPower Powerpack or disassemble the XPower Powerpack except to replace the inte...

A-1 A Specifications Electrical Specifications \ 12 V DC Section Internal battery type sealed, AGM (Absorbed Glass Mat) lead acid Internal battery voltage (nominal) 12 V DC Internal battery capacity (minimum) 20 Ah Internal battery CCA rating 200 CCA DC Power Socket (maximum continuous load) 12 A wi...

Physical Specifications 975-0057-01-01 A-3 an Physical Specifications Air Compressor ( XPower Powerpack 400 Plus only) Pressure 250 PSI (lb./in 2 ) Accessories Jump-start cables 24" (0.61 m), 4 AWG wire with black and red battery clamps DC charge cable 39" (1 m) 18 AWG with male to male ligh...

B-2 Warranty What does this warranty cover? This Limited Warranty is provided by Xantrex Technology, Inc. ("Xantrex") and covers defects in workmanship and materials in your XPower Powerpack 400 and XPower Powerpack 400 Plus . This warranty lasts for a Warranty Period of 6 months from the da...

B-3 Direct returns may be performed according to the Xantrex Return Material Authorization Policy described in your product manual. For some products, Xantrex maintains a network of regional Authorized Service Centers. Call Xantrex or check our website to see if your product can be repaired at one o...

B-4 Disclaimer Product THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED BY XANTREX IN CONNECTION WITH YOUR XANTREX PRODUCT AND IS, WHERE PERMITTED BY LAW, IN LIEU OF ALL OTHER WARRANTIES, CONDITIONS, GUARANTEES, REPRESENTATIONS, OBLIGATIONS AND LIABILITIES, EXPRESS OR IMPLIED, STATU...

B-5 Warning: Limitations On Use Please refer to your product manual for limitations on uses of the product. SPECIFICALLY, PLEASE NOTE THAT THE XPower Powerpack 400 and XPower Powerpack 400 Plus SHOULD NOT BE USED IN CONNECTION WITH LIFE SUPPORT SYSTEMS OR OTHER MEDICAL EQUIPMENT OR DEVICES. WITHOUT ...

B-6 Return Procedure 1. Package the unit safely, preferably using the original box and packing materials. Please ensure that your product is shipped fully insured in the original packaging or equivalent. This warranty will not apply where the product is damaged due to improper packaging. 2. Include ...

B-7 Out of Warranty Service If the warranty period for your XPower Powerpack 400 and XPower Powerpack 400 Plus has expired, if the unit was damaged by misuse or incorrect installation, if other conditions of the warranty have not been met, or if no dated proof of purchase is available, your inverter...

Warranty and Product Information B-8 975-0057-01-01 Information About Your System As soon as you open your XPower Powerpack 400 and XPower Powerpack 400 Plus package, record the following information and be sure to keep your proof of purchase. If you need to contact Customer Service, please record t...