Xantech ZA8REC - Manual
Xantech ZA8REC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – mobile digital device; portable audio device can also be used.
- Page 3 – INSTALLATION – Remotely Located Audio Component; Figure 2
- Page 4 – INSTALLATION – ZA8REC and ZATRAN Wiring; “BL” – Blue; Figure 3
-
1
-
INSTALLATION INSTRUCTIONS
ZA8REC
Zone Audio Receiver
DESCRIPTION
The ZA8REC is a zone audio receiver with 8 independent inputs. When used with the ZATRAN (not
included), the Zone Audio system can transmit line level audio long distances over CAT5 cable. The
advantage of the ZA8REC is it allows the installer to elegantly connect audio source components
located in the zone to Xantech’s line of multi-room controllers such as the MRC88 and
MRAUDIO8X8.
Balanced differential line driver circuits ensure noise-free connections from audio sources located up
to 300 feet away! The ZA8REC’s built-in IR interface allows control of the remotely located source,
and works flawlessly with Xantech’s IR distribution components and multi-room controllers.
SPECIFICATIONS
Input Level: 0 to 2.0Vpp
Frequency Response: ±0.5dB 20Hz to 20kHz
THD+N:
0.01%
IR Input/Output Levels: +12V
IR Bandwidth: 30kHz to 100kHz
Wire Requirements: CAT5, or 4 twisted pair 22AWG
Use in conjunction with ZATRAN (not included)
Power, +12VDC, 750mA (not included, suggest Xantech 782-00 Power Supply)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 2 - INSTALLATION - iPod ® mobile digital device Figure 1 shows an application where the remotely located source is an iPod ® player. A similar portable audio device can also be used. Figure 1
- 3 - INSTALLATION – Remotely Located Audio Component Figure 2 shows a typical application where the remotely located source is a CD player or similar audio device. The remotely located source component can be controlled by affixing the 283M mouse emitter (included) onto the IR sensor window. The MR...
- 4 - INSTALLATION – ZA8REC and ZATRAN Wiring The connection between the ‘receive’ and ‘send’ devices can be made using a CAT5 cable. Figure 3 shows the recommended wire color-coding connection as per the sticker located on the WECO screw terminal. “BL” – Blue “OR” – Orange “BL/W” – Blue/White “OR/W...
