Xantech RP41AV - Manual
Xantech RP41AV – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – RC68+ BUTTON DESCRIPTIONS
- Page 3 – Amplifiers & Preamplifiers; TYPICAL RP41AV SINGLE ZONE SYSTEM; In this case, you would program the Smart Pad; XANTECH; MAIN ROOM; Left; TV; A typical single zone system
- Page 4 – Installation Instructions.; Common
- Page 5 – RP41AV SPECIFICATIONS
- Page 6 – INSTALLATION INSTRUCTIONS; DESCRIPTION; Blink-IRTM Mouse Emitter Assembly; INSTALLATION; to replace the current adhesive layer for best adhesion.
1
Amplifiers & Preamplifiers
INSTALLATION INSTRUCTIONS
GENERAL INFORMATION
The RP41AV, Fig. 1, is a fully functional infrared remote controlled audio/video preamp. Volume, Bass,
Treble, Balance and Mute functions, in addition to A/V input switching, provide all the functions needed for
multi-room systems. It features a low noise, low distortion design with high headroom capability, for highest
audio and baseband video performance.
The RP41AV has the following features and functions:
• The model RC68+ (and RC68) handheld programmer (available separately), is the source of all the IR
(infrared) commands necessary to operate the RP41AV (see Fig. 2). Normally the installer would "teach"
these commands into a Xantech Learning Remote, Key Pad or other learning device for use by the
customer.
• Audio and video signals connected to four separate line level A/V inputs, labeled 1, 2, 3, and 4, may be
accessed in any order by IR commands.
• Separate Volume (Up/Down), Balance (Left/Right), Bass and Treble controls feature continuous
adjustment in 2 dB steps, in either direction, all IR controlled.
• Balance, Bass &Treble controls have a Flat function for instant return to flat response from any previous
setting.
• Separate Mute On & Mute Off functions ensure positive mute command execution without knowing
status. This is helpful in remote rooms when all adjustments are made “blind” without any visual aids for
status.
• IR control input port connects to the emitter output of Xantech devices, allowing remote control from
keypads, IR receivers, connecting blocks, etc.
• Tone controls allow individual "EQ" of each zone when using multiple RP41AV's in multi-zone installa-
tions.
• The space saving “flat pack” design
allows great flexibility in mounting and
positioning.
PANEL DESCRIPTIONS
1. INPUT jacks. Connect to the corre-
sponding output jacks of source
components (satellite receiver, VCR,
camcorder, laser disc player, TV
surveillance camera, CD player, AM/
FM tuner, cassette tape deck, etc.).
2. OUTPUT jacks. Connect the
VIDEO output jack to the corresponding Video input jacks of AV receivers, TV monitors, VCRs, etc.
Connect the AUDIO LEFT and AUDIO RIGHT output jacks to the corresponding input jacks on a main
power amplifier. Since these are low-impedance outputs, you may connect up to 5 power amplifiers
to one RP41AV prodvided such amplifiers have input impedances of 22k Ohms or more. Use "Y"
connectors or other paralleling means.
RP41AV
REMOTE PREAMP
IR
CONFIRM
VIDEO
AUDIO
LEFT
INPUT
OUTPUT
AUDIO
RIGHT
1
2
3
4
6
3
5
1
2
4
®
RP41AV
REMOTE PREAMP
V V G IR IN
POWER 15VAC
Fig. 1 RP411AV Panel Items
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 4. G S terminals. Input terminals for the IR control signal. Connect a 2-conductor cable from the emitter or signal output port of any Xantech Connecting Block, IR receiver, Key Pad, or Controller here. Thepositive lead connects to "S" and the negative to "G". 5. IR CONFIRM LED. ...
3 Amplifiers & Preamplifiers RP41AV 15. Treble & Bass "N-Flat" buttons. These buttons, when pressed (identified by a "—" mark), will instantly return the treble and bass to their electrical flat settings from any previously adjusted values. 17. Code Group Numbers. If more t...
4 RP41AV A MULTI-ZONE SYSTEM The following diagram illustrates a typical Multi-Zone system, using the RP41AV. 1. For simplicity, only 4 zones are shown ... many more could be added using the Xantech 796-20 Zone Expander and more RP41AV's. 2. Using an RP41AV plus a basic power amplifier for each zo...
