Xantech MRKP2 - Manual
Xantech MRKP2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Precautions; Always exercise care when operating the MRKP2 Keypad.
- Page 4 – Important Notes; to make sure that you; Planning
- Page 5 – MRKP2 – FRONT PANEL; Figure 2.3: MRKP2 Keypad layout and Main display
- Page 6 – MRKP2 – REAR CONNECTORS; Figure 2.4: Rear connector board of MRKP2 Keypad; CONTROLLER PORT; TO EXPANSION; Installation; Note: Do not mount the MRKP2 in the same electrical back- box as high
- Page 7 – MRKP2 to MX88 and Expansion Keypads; Figure 3.0: MRKP2 to MX88 with expansion keypads; Compatible Handheld remotes
- Page 8 – Figure 3.1: MRKP2 to External IR Connections; /MX88 for details on setting up QuickConfig.
- Page 10 – IR flooding; Depends on electrical back-box used – see below
- Page 12 – Xantech Limited Warranty; Xantech® is a registered trademark of Xantech LLC; Xantech LLC
INSTALLATION INSTRUCTIONS
MRKP2
Keypad controller
North American Standard
1
Safety Information
Read Information — All the safety and operating information should be read before the
appliance is operated.
Follow Information — All operating and use information should be followed.
Retain Information — The safety and operating information should be retained for
future reference.
Heed Warnings — All warnings on the appliance and in the operating instructions
should be heeded.
Wall Mounting — Mounting of this appliance should be done only by an authorized
installer.
Non-Use Periods — Appliances that are left unattended and unused for long periods of
time should be de-energized.
Water — Do not use the apparatus near water.
Cleaning — Unplug the controller unit (MX88/MRC88m/MRAUDIO8x8m) from the
power outlet before cleaning the MRKP2. Use only a dry cloth to clean the apparatus.
Object and Liquid Entry — Never insert objects of any kind through the openings of
these appliances, as they may touch dangerous voltage points or short-circuit parts that
could result in a fire or electric shock. Care should be taken so that objects do not fall
and liquids are not spilled into the appliance through openings in the enclosure.
Servicing — Do not attempt to service these appliances yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Damage Requiring Service — These appliances should be serviced by qualified
service personnel when:
A power supply connection or a plug has been damaged or
If liquid has been spilled into the appliance or objects have fallen into the appliance
or
The appliance has been exposed to water or moisture or
The appliance does not appear to operate normally or exhibits a marked change in
performance or
The appliance has been dropped or the enclosure damaged.
Replacement Parts — When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or that have the
same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards. The Master Control Unit battery should be replaced
only after turning the power off and only by an authorized installer.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Safety Check — Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. Lightning Storms — Unplug the controller unit (MX88/MRC88m/MRAUDIO8x8m) during lightning storms or when unused ...
6 2. System Design Overview/Applications Important Notes A recommended electrical back box is always required for installation of this product (see specifications). The MRKP2 is specifically designed to work with the MX88 series, MRC88m, and MRAUDIO8x8m (Firmware ver. 3.16 at the time of writing thi...
8 Figure 2.1: T568A and T568B Wiring Standard Figure 2.2: MX88 – MRKP2 Pin-out diagram for Cat-5 cable (T568B configuration) Wire Color Pin # Signal white/orange 1 485 + orange 2 485 - white/green 3 12V RET blue 4 IR RET white/blue 5 IR green 6 +12V white/brown 7 Attn. 485 brown 8 IR Loop Back Cat 5...
