Xantech MRAUDIO8X8 - Manual

Table of Contents:

• Page 2 – TABLE OF CONTENTS
• Page 3 – About the MRC88/MRAUDIO8X8 Quick Start Guide
• Page 4 – Figure 1 – Typical MRC88 System
• Page 5 – SYSTEM PLANNING; CONTROLLER LOCATION
• Page 6 – Keypad Location; compatibility prior to determining mounting location.; Figure 3; Do not mount the Keypad in the same box with high voltage (AC); Figure 3 – Installing the MRC88 Keypad
• Page 7 – KEYPAD CABLE LENGTH
• Page 8 – SPEAKER WIRE LENGTH; MRC88 Controller, two pair for each zone.; Table 1 – Speaker Wire Length/Gauge
• Page 9 – VIDEO DISPLAY CABLE LENGTH; display locations to the MRC88.; Figure 6 – MRC88 Zone Video Cable Length
• Page 10 – PREPARATION – WIRING; Power voltage for the keypad is transmitted along the CAT5 cable!; Trim the end of the CAT5 so all eight conductors are the same length.; Figure 7
• Page 11 – Test the cable connections using a proper CAT5 cable tester; Figure
• Page 12 – SOURCE CONNECTIONS
• Page 14 – ZONE CONNECTIONS
• Page 15 – Zone Speaker Terminal
• Page 16 – Zone Video Output
• Page 17 – SYSTEM INITIALIZATION; Power Button; on the; MRC88 Front Panel; . The Xantech logo will; Status LEDs; Indicates general initialization is occurring.; Fast Green Blink –; Indicates that the keypad(s) on the associated zone is; All Lights Off –; Initialization is complete, system is ready for operation.; Preparation – Wiring/Terminating The CAT5; in this Guide for additional information.
• Page 18 – Table 2 – MRC88 Keypad Default Functionality; Table 3 – MRC88 Default Audio and Code Group Settings
• Page 21 – PROGRAMMING – UNIVERSAL DRAGONTM
• Page 42 – NOTES