Xantech HL95 - Manual
Xantech HL95 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CABLE CONNECTIONS; Signal Name; HL95 IR Receiver
- Page 3 – REMOTE ROOM APPLICATION; Perhaps the most common problem you may encounter is stray IR
- Page 4 – Limited Warranty
INSTALLATION INSTRUCTIONS
HL95
Hidden Link™ Shelf Top
Extended Range
Plasma\LCD\LED\CFL Friendly
IR Receiver
1
DESCRIPTION
The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. It
includes an IR receiver and a CB12 Connecting Block. The Hidden Link IR
Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which
is plugged directly into the “IR RCVR” jack on the CB12. It can also be plugged
into the “AUX” or “IR RCVR” jack of other Xantech connecting blocks, such as
the models 789-44, CB60, and 791-44. The Hidden Link IR Receiver is
primarily intended for use in installations where the connecting block is within
reach of its 7-foot cable – as when installing the Hidden Link IR Receiver in a
cabinet where the controlled equipment is behind closed doors.
FEATURES
•
Very small package, only 2.00”L x 3.15”W x 0.70”H.
•
System testing red-talk-back LED.
•
Includes CB12 Connecting Block for easy system installation.
SPECIFICATIONS
•
Infrared carrier frequency bandwidth: 25 – 60 kHz.
•
Reception range: Up to 120 feet, depending on remote control output
strength and ambient conditions.
•
Nominal reception angle: 55 degrees off axis.
•
Cable requirements: See “INSTALLATION” below.
•
Max. transmission length: 1 mile using 18 gauge wire.
•
Maximum current output: 100mA
•
Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
•
Dimensions: 2.00”x3.15”x0.70” (51mm x 80mm x 18mm)
•
Power requirements: +12VDC, 20mA.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION QUICK-START A typical system will use an IR receiver, several emitters, and a power supply all connected to a connecting block. 1. Connect the IR receiver to the “IR RCVR” port on the connecting block. The ‘red’ connector is installed to the ‘red’ plug. Note: In some extended distance...
4 REMOTE ROOM APPLICATION The CB12 Connecting Block, supplied with the Hidden Link IR Receiver, has a three terminal input strip for connection of external infrared receivers should you wish to control your equipment from other rooms. • The terminals are marked V G S. (V = +12V, G = Ground, and S = ...
6 Limited Warranty Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repair...
