Xantech DCH4 - Manual
Xantech DCH4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Note: Call in from another line
- Page 4 – B. Quick Programming Features
- Page 5 – The security code must be six digits in length and can NOT contain a *; SWITCH
- Page 8 – * Note: The latch command can be disabled
- Page 9 – visitor can now open the door.; F. Operation Commands
- Page 10 – FCC REQUIREMENTS
08905107C
-
1
-
INSTALLATION INSTRUCTIONS
DCH4
Doorbell Communicator Hub
DESCRIPTION
The DCH4 is a Doorbell Communicator Hub that provides keyless entry control with the MRC88CTL.
The DCH4 has the ability to answer and open up to 4 doors or gates from the nearest phone. When
combined with the DPC100 and MRC88CTL, the DCH4 can provide 2 different door chimes and
whole-house paging.
SPECIFICATIONS
Power: 120VAC/13.8VAC 1.25Amp, UL listed adaptor provided.
Dimensions: 210mm x 159mm x 45mm (8.25” x 6.25” x 1.75”)
Shipping Weight: 1.5 kg (3.2 lbs)
Environmental: 0C to 32C (32F to 90F) with 5% to 95% non-condensing humidity.
Ring Output: 8 REN, capable of ringing (16) 0.5 REN phones
REN:
0.1A
Relay Contacts: 5A @ 30VDC/250VAC
Connections: (30) cage clamp screw terminals
Talk Battery: 40 VDC
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
08905107C - 3 - PROGRAMMING A. Accessing Programming 1. Accessing the Programming Mode with a Security Code Step 1. Come off-hook with any house phone (device) connected to terminals 4 & 5 , LINE OUT TO PHONES . Step 2. Enter * # followed by the 6-digit security code (factory set to 845464 ). St...
08905107C - 4 - B. Quick Programming Features Enter Digits - then - Memory Location Privacy Number (factory disabled) 0-6 digits (0-9) + #00 Entry phone 1 keyless entry codes (factory disabled) 4-6 digits (0-9) + #11 - #16 * Entry phone 1 one time use keyless entry codes (factory disabled) 4-6 digit...
08905107C - 5 - C. Security Code This six digit number can be used to access the programming mode. The security code has been factory set to 845464 . It is recommended that you change the security code to a personal 6 digit number. To change the security code, access programming (see Programming sec...
