Xantech 598-00 - Manual
Xantech 598-00 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
Controllers
INSTALLATION INSTRUCTIONS
• The 598 is an eight button, momentary, dry contact keypad. It is normally used in conjunction with the
Xantech 590 Programmable Controller as shown in the illustration below.
• Requires 9-conductor cable, as shown. Use 24 gauge, stranded or solid wire, up to lengths of 5000'.
• Two 598's may be used to provide momentary switch closures for all 16 of the 590 input terminals.
• Two or more 598's may also be wired in parallel to the same terminals on the 590 where control from more
than one room or area is required.
• The 598 fits into a standard single-gang J-box. 598's may also be used side-by-side in two (or more) gang
J-boxes.
• A legend cutout sheet (included) contains typical component function command icons for button
identification.
598-00
EIGHT BUTTON DRY CONTACT KEYPAD
C
1
2
3
4
5
6
7
8
1
12VDC
12VDC
1 2 3 4
BANK
RES DEL SEQ PGM
+
–
2
3
4
5
6
7
8
9 10 11
14 15 16 O G
–
+
12 13
Emitter, Connecting Block, etc.
To 120 V AC
Unswitched
786-00
Power
Supply
White Striped
Side (output)
Wire size typically AWG 20-24
Model 590
(rear panel)
Model 598
Key Pad
(rear view)
ON
Ground or "
–
"
return wires.
+12V DC
5-14-99
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
