Page 2 - I n t r o d u c t i o n
2 I n t r o d u c t i o n SFMK (Rev. 2/20/2008) TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods ® dealer. Read manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Operator’s Manualar...
Page 3 - S a f e t y; SAFETY RULES; Si no lee Ingles, pida ayuda a
S a f e t y 3 4-Point SFMK (Rev. 5/8/2006) SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! This Sub-Frame Mounting Kit is only for the backhoes and tractors specified in the Sub-FrameM o u n t I n s ta l l a t i o n s e c t i o n o f t h i s m a n u a l . A n yother use or modificat...
Page 5 - I n s ta l l a t i o n; BACKHOE SUB-FRAME INSTALLATION; Tractor Preparation; WARNING
I n s ta l l a t i o n 5 MAN0715 (Rev. 10/31/2008) BACKHOE SUB-FRAME INSTALLATION Tractor Preparation ■ Only use 1028310 4-Point Sub-Frame Mount- ing Kit for mounting Woods BH90-X backhoe onNew Holland ® TT60A or TT75A tractors equipped with Woods LU126 loader. Use mount kit 1029700and 1028310 Sub-F...
Page 7 - Install Tractor Brackets
I n s ta l l a t i o n 7 MAN0715 (Rev. 10/31/2008) Install Tractor Brackets 1. Place right tractor bracket (1) under right side oftractor. Use a hydraulic floor jack to help raiseand hold tractor bracket in position. 2. Attach right tractor bracket (1) to right loadermount or right backhoe bracket (...
Page 8 - HOSE KIT INSTALLATION; Attach Backhoe Mounts to Backhoe
8 I n s ta l l a t i o n MAN0715 (rev. 10/31/2008) HOSE KIT INSTALLATION Attach Backhoe Mounts to Backhoe NOTE: Leave all hardware loose until backhoe has been mounted to the tractor. 1. Attach right backhoe mount (3) and left backhoemount (4) to backhoe frame. 2. Secure into position using six (thr...
Page 9 - Install Fittings and Hose; Install Hoses to Backhoe Valve
I n s ta l l a t i o n 9 MAN0715 (Rev. 10/31/2008) 1028360 HOSE KIT Install Fittings and Hose 1028360 Hose Kit is used to connect backhoehydraulic hoses to the tractor rear hydraulic valve andthe Woods loader control valve. 1. Attach adapter (4), adapter (5) and female quickcoupler (6) into the open...
Page 10 - Install Fittings
1 0 I n s ta l l a t i o n MAN0715 (rev. 10/31/2008) 1029730 HOSE KIT Install Fittings 1029730 Hose Kit is used to connect backhoehydraulic hoses to the tractor hydraulic line and theNew Holland loader control valve. 1. Disconnect the loader control valve PBY hosefrom the hydraulic hard line below t...
Page 11 - Mount Backhoe to Tractor; Check Hydraulic System
I n s ta l l a t i o n 11 MAN0715 (Rev. 10/31/2008) Mount Backhoe to Tractor This mounting kit is designed to provide sec ure mounting and a de qua te operator clea r-ance for most operators when properly installed.Check clearance dimensions shown below to besure you have installed seat bracket co...
Page 13 - Remove Backhoe from Tractor
I n s ta l l a t i o n 1 3 MAN0715 (Rev. 10/31/2008) Remove Backhoe from Tractor The only time the backhoe may be operated from a position other than the operator sea t i sduring backhoe attachment and removal. Opera-tor must: • Read Mounting Kit Manual instructions ona t ta c h i n g a n d r e m ...
Page 14 - STORAGE
1 4 I n s ta l l a t i o n MAN0715 (rev. 10/31/2008) STORAGE Connect Hydraulic Hoses NOTICE ■ Failure to connect hoses together will result in damage to tractor hydraulic system. Tractor & Woods Loader: Connect male quick cou- pler on end of hose from loader control valve tofemale quick coupler ...
Page 15 - P a rts; PINCH POINT
P a rts 1 5 MAN0715 (Rev. 10/31/2008) 1028310 4-POINT SUB-FRAME MOUNTING KIT WARNING PINCH POINT Keep hands clear. 1006885 21 - PN 1006885 MODEL NO. SERIAL NO. Woods Equipment Company Oregon, Illinois, U.S.A. REF PART QTY DESCRIPTION 1 1028308 1 Right tractor bracket 2 1028309 1 Left tractor bracket...
Page 18 - A p p e n d i x; BOLT TORQUE CHART
1 8 A p p e n d i x Bolt Torque & Size Charts (Rev. 3/28/2007) BOLT TORQUE CHART Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual ...
Page 19 - BOLT SIZE CHART; SAE Bolt Thread Sizes; MM
A p p e n d i x 1 9 Bolt Torque & Size Charts (Rev. 3/28/2007) BOLT SIZE CHART NOTE: Chart shows bolt thread sizes and corresponding head (wrench) sizes for standard SAE and metric bolts. ABBREVIATIONS AG .............................................................. Agriculture ASABE .............
Page 20 - WARRANTY
F-3079 (Rev 8/26/2008) Woods Equipment Company 2606 South Illinois Route 2 Post Office Box 1000Oregon, Illinois 61061 USA 800-319-6637 tel800-399-6637 faxwww.WoodsEquipment.com WARRANTY (All Models Except Mow’n Machine TM Zero-Turn Mowers and Woods Boundary TM Utility Vehicles) Please Enter Informat...
Page 21 - (Replacement Parts For All Models Except Mow’n Machine
F-8494 (Rev. 6/23/2005) WARRANTY (Replacement Parts For All Models Except Mow’n Machine TM Zero-Turn Mowers and Woods Boundary TM Utility Vehicles) Woods Equipment Company (“WOODS”) warrants this product to be free from defect in material andworkmanship for a period of ninety (90) days from the date...