Windsor IM 10066360 - Manual

Page 3 - TABLE OF CONTENTS; OPERATIONS

TABLE OF CONTENTS 86269870 07/11/07 3 Data Log/Overview. ................................... 2 Table of Contents....................................... 3 HOW TO USE THIS MANUAL How to use this Manual.............................. 1-1 SAFETY Important Safety Instructions ..................... 2-1 Haz...

Page 4 - HOW TO USE THIS MANUAL; REF –

HOW TO USE THIS MANUAL 86269870 04/02/07 1-1 MODEL _____________________________ DATE OF PURCHASE ___________________ SERIAL NUMBER _____________________ SALES REPRESENTATIVE # _____________ This manual contains the following sections: - HOW TO USE THIS MANUAL - SAFETY - OPERATIONS - MAINTENANCE - P...

Page 5 - SAFETY; IMPORTANT SAFETY INSTRUCTIONS; When using an electrical appliance, basic precaution; READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.; SAVE THESE INSTRUCTIONS

SAFETY 86269870 04/02/07 2-1 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Connect to a properly grounded out...

Page 6 - HAZARD INTENSITY LEVEL; FOR; WARNING; WARNING; CAUTION

SAFETY 86269870 04/02/07 2-2 HAZARD INTENSITY LEVEL T he following symbols are used throughout this guide as indicated in their descriptions: There are three levels of hazard intensity identified by signal words - WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the...

Page 7 - ELECTRICAL

SAFETY 86269870 04/02/07 2-3 THIS PRODUCT IS FOR COMMERCIAL USE ONLY. ELECTRICAL In the USA, this machine operates on a standard 15 amp 120V, 60 hz, A.C. power circuit. The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on th...

Page 8 - SAFETY LABEL LOCATION; If at any time the labels become illegible, promptly replace them.

SAFETY 86269870 04/02/07 2-4 SAFETY LABEL LOCATION The following WARNING LABEL(S) are found on your cleaning unit. These labels point out important Warnings and Cautions which should be followed at all times. Failure to follow warnings and cautions could result in fatality, personal injury to yourse...

Page 9 - TECHNICAL SPECIFICATIONS; ITEM DIMENSION/CAPACITY

OPERATIONS 86269870 04/14/08 3-1 TECHNICAL SPECIFICATIONS 120V ITEM DIMENSION/CAPACITY Electrical 120V Nominal Power 0.5 HP Rated Amperage 7 Amps Brush Width 17 – 16.5” (430 - 420 mm) Brush RPM 470 RPM Wheels 3 inches (75 mm) non-marking grey Dimensions - Weight - Weight - Deluxe 48 lbs. (22 kg) 56 ...

Page 10 - DELUXE; Tips

OPERATIONS 86269870 07/11/07 3-2 HOW THE MACHINES WORK The Carpet Maintainer is designed to maintain your carpet using the Quick Dry Carpet Care System. By using the Carpet Maintainer in conjunction with iCapsol or Prochem ProCaps chemical solution, you can perform a regular light cleaning and groom...

Page 11 - voltage is acceptable.; STARTING MACHINE; 20V only.

OPERATIONS 86269870 08/20/08 3-3 MACHINE OPERATION PRE-RUN INSPECTION Perform a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Check the rating plate to confirm voltage and frequency is the same as the power supply. NOTE: A 10% variation i...

Page 12 - TRANSPORTING A SPRAYER

OPERATIONS 86269870 08/20/07 3-4 TRANSPORTING A SPRAYER 1. This machine has the capability to mount a small pump-up sprayer. TRANSPORTING CHEMICAL - DELUXE 1. This machine has the capability to mount chemical bottles or trigger sprayers to the back of the solution tank. This Machine is not intended ...

Page 13 - COMPONENTS; iCapsol Mini

COMPONENTS 86269870 07/11/07 3-5 6 2 3 2 5 1A 3 8 1B 1B 1A 4 4 7 1A. Stop Switch (red-120V only) 1B. On/Off Switch (black-230 only) 2. Start Switch (green) 3. Brushes 4. Handle Release 5. Tank 6. Strainer 7. Jet 8. Spray Pump Switch iCapsol Mini iCapsol Mini Deluxe

Page 14 - DO NOT; DAILY MAINTENANCE

MAINTENANCE 86269870 07/11/07 4-1 BRUSH CLEANING AND MAINTENANCE After each session of carpet cleaning, the brushes and the brush housing should be cleaned. Before cleaning or changing the brushes, always unplug the machine from the power supply. Brushes are removed without tools. After handle is in...

Page 15 - MAINTENANCE; MACHINE TROUBLESHOOTING

MAINTENANCE 86269870 07/11/07 4-2 MACHINE TROUBLESHOOTING PROBLEM CAUSE SOLUTION No power to machine Tripped electrical circuit breaker in fuse box of building Check building circuit breaker Faulty power cord Replace power cord Power switch failure or relay failure Replace power switch or relay Trip...

Page 16 - BRUSH

Page 18 - BRUSH LIFT

Page 20 - DECAL

Page 26 - FRAME

Page 28 - FRAME – DELUXE

FRAME – DELUXE 86269870 08/20/08 5-13 1 13 3 14 4 10 9 8 7 6 5 2 12 11

Page 30 - HANDLE

HANDLE 86269870 08/20/08 5-15 7 25B 23A 1 20 2 15B 8B 6B 19 18 17 16 15A 3 14 13 12 11 10 9 8A 22 6A 5 21 4 3 23B 26 25A 24 3

Page 32 - HOPPER

Page 34 - MOTOR

MOTOR 86269870 04/02/07 5-19 1 3 4 5 6 7 8 9 10 11 12 13 14 15A 2 15B 16 17 18

Page 36 - REAR WHEEL

Page 38 - SOLUTION TANK - DELUXE

SOLUTION TANK - DELUXE 86269870 04/14/08 5-23 31 3 4 1 5 8 6 16 9 12 13 19 15 21 7 22 18 19 20 15 21 13 24 25 23 11 10 30 29 2 14A 14B 28 27 26 -C- -C- -B- -B- -A- -A-

Page 44 - WIRING – 120V DELUXE

WIRING – 120V DELUXE 86269870 08/20/08 5-29 N.O. N.C. RED GREEN BLUE N.O. N.O. BLUE BLK GRN BLKBLKBLK BL K BL K BL K BL K BLK BLK BLK WHT WHT WHT ORG ORG BL K BL K GRN WH T BL K OR G PU R RE D WH T GR N PUMP MOTOR WHT MOTOR 1 2 4 3 5 6 8 7 N GRN BLK BLK RED ORG ORG ORG RED PUR ORG BLK BLK BL K OR G ...

Page 45 - WIRING - 120V DELUXE

WIRING - 120V DELUXE 86269870 01/02/08 5-30 REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO. FROM NOTES: 1 86218820 41563 1 HARNESS, MAIN 2 86226220 880462 1 WIRE, 10” BLK/18 76040 3 86226260 880468 1 WIRE, 15” ORG/18 76040 X 76040 4 86226270 880469 1 WIRE, 18” ORG/18 5 86226280 880471 1 WIRE, 9” BLK...

Page 48 - SUGGESTED SPARE PARTS

SUGGESTED SPARE PARTS 86269870 08/20/08 5-33 PART NO. PRV NO. DESCRIPTION SERIAL NO. FROM NOTES: 86216180 141057 BRUSH SET, MTR, 54206/54216 86215800 11055 BELT, HTD, 15MM X 325, 65 TOOTH 86215320 11058 BELT, HTD, 15MM X 300, 60 TOOTH 86214850 12544 ASSY, BRUSH & HUB 86217230 38326 CORD HOOK, UP...

Page 49 - SERIAL NUMBERS

SERIAL NUMBERS 86269870 04/14/08 5-34 REF. NO. MODEL: SERIAL # 1 IM: 10066360000690 - IMX : 10066400000781