Whirlpool WMH31017HS - Manual

Whirlpool WMH31017HS

A user manual for a Whirlpool microwave hood covers essential installation requirements, emphasizing electrical safety and proper placement to ensure safe operation. The guide highlights critical topics such as mounting dimensions, ventilation design (including roof/wall vent configurations), and clearance specifications to maintain airflow efficiency. Safety warnings about electrical hazards are central, alongside practical calculations for vent sizing to optimize performance.

1

2

3

Table of Contents:

Page 1 – Microwave Hood Installation Instructions and Safety
Page 2 – Venting Design Specifications
Page 3 – Vent Length Calculation and Equivalent Lengths

Loading the manual

MICROWAVE HOOD INSTALLATION INSTRUCTIONS

PRODUCT MODEL NUMBERS

WMH31017H

Because Whirlpool Corporation includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.

Ref. W10918334

06/01/2017

Page 1 of 3

PRODUCT DIMENSIONS

Installation Dimensions

NOTE:

The grounded 3 prong outlet must be inside the upper cabinet.

See the “Electrical Requirements” section.

12" (30.5 cm) min.
14" (35.6 cm) max.

30"

(76.2 cm)

min.

A B

upper cabinet and

side cabinet depth

30"

(76.2 cm)

typical*

66" (167.6 cm) min.

A. 2" x 4" wall stud
B. Grounded 3 prong outlet

*30” (76.2 cm) is typical for 66” (167.6 cm) installation height. Exact

dimensions may vary depending on type of range/

cooktop below.

PRODUCT DIMENSIONS

29

⁷⁄₈

" (76.0 cm)

17

¹⁄₈

"

(43.5 cm)

+/-

³⁄₁₆

"

(0.5 cm)

16

¹⁄₄

"

(41.3 cm)

Up to

16

³⁄₄

"

(42.5 cm)*

*Overall depth of product will vary slightly depending on

door design.

LOCATION REQUIREMENTS

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.

WARNING

Observe all governing codes and ordinances.

Required:

■

A 120-volt, 60 Hz, AC-only, 15- or 20-amp electrical supply with a fuse

or circuit breaker

Recommended:

■

A time-delay fuse or time-delay circuit breaker

■

A separate circuit serving only this microwave oven

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Whirlpool
Model: WMH31017HS
Document type: Manual
Category: Microwave
Language(s): English
Pages: 3
File size: 119.8 KB
Format: PDF

Other Manuals for Whirlpool WMH31017HS

User Manual

Summary

Page 1 - Microwave Hood Installation Instructions and Safety

Installation requirements, location specifications, product dimensions for model WMH31017H, mounting diagrams, and electrical safety warnings to prevent shock hazards.

Page 2 - Venting Design Specifications

Design specifications for microwave hood venting, including recommended materials, clearance requirements, and standard fitting dimensions for roof and wall configurations.

Page 3 - Vent Length Calculation and Equivalent Lengths

Guidelines for calculating required vent length for rectangular and round systems, including equivalent lengths for fittings such as elbows and transition pieces with examples.

Ask a question