Whirlpool FDLR10250 - User Manual

EN

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your appliance on

www.whirlpool.com.au

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed

instructions on how to remove them, see the Installation Guide.

PROGRAMME CHART

1.

“ON/OFF” button

2.

Programme selector

3.

“Temperature” button

4.

“Spin” button

5.

“Start delay” button

6.

“Start/Pause” button

7.

Option buttons

8.

“Key lock“button

INDICATORS

Door can be opened

Washing phase

Indicates washing phase of the cycle

Failure: Call Service

Refer to Troubleshooting section

Failure: Water filter clogged

Water cannot be drained; water filter

might be blocked

Failure: Water tap closed

No or not sufficient inlet water. “Beep”

sound every 5 seconds.

In the event of any failures, refer to the

Troubleshooting section in USER MANUAL

CONTROL PANEL

2.

1.

6.

3.

4.

5.

8.

7.

7.

PRODUCT DESCRIPTION

1.

Worktop

2.

Detergent dispenser

3.

Control panel

4.

Door handle

5.

Door

6.

Water filter - behind plinth

7.

Plinth (removable)

8.

Adjustable feet (4)

1.

2.

7.

3.

4.

5.

6.

8.

DETERGENT DISPENSER

Main wash compartment

Detergent for the main wash, stain remover

or water softener. For a liquid detergent it is

recommended to use removable plastic partition

A

(supplied) for a proper dosage. If powder

detergent is used, place the partition into slot

B.

Prewash compartment

Detergent for the prewash.

Softener compartment

Fabric softener. Liquid starch.

Pour in softener or starch solution only up to the “max” mark.

Release button



Press to remove tray for cleaning.

A

B



** The display will show the suggested spin speed as default value.
*** The duration of the programme is shown on the display.

6th Sense -

the sensor technology adapts water, energy and programme duration to your wash

load.

Test wash cycle in compliance with regulation and AS/NZS 2040.1 and AS/NZS 2040.2:

set programme

Cotton

with a temperature of 60°C at 1400 rpm (load of 10 kg).

This data may differ in your home due to changing conditions in inlet water temperature,

water pressure etc. Approximate programme duration values refer to the default setting of the

programmes, without options.

Max load 10 Kg

Detergents and additives

Recommended

detergent

Programme

Temperatures

Max. spin

speed

(rpm

Max

load

(kg

Duration

(Minutes

Prewash Main wash Softener

Po

w

der

Liquid

Default

Range

Mixed

40°C

- 40°C

1000

10.0

***

–





–



White / Drum Clean

60°C

- 90°C

1400

9.5



(90°)









Cotton

40°C

- 60°C

1400

9.5

–









Cotton

60°C

- 60°C

1400

10.0

–









Bed Linen

60°C

- 60°C

1400

9.5

–









Sport

40°C

- 40°C

600

4.5

–





–



Duvet

30°C

- 30°C

1000

3.5

–





–



Steam Refresh

–

–

-

2.0

–

–

–

–

–

Spin & Drain

–

–

1400

10.0

–

–

–

–

–

Rinse & Spin

–

–

1400

10.0

–

–



–

–

Rapid 30 min

30°C

- 30°C

1200 (**)

5.5

–





–



Colours 15°

15°C

15°C

1000

4.5

–





–



Silk

30°C

- 30°C

600 (**)

1.0

–





–



Wool

40°C

- 40°C

800

2.5

–





–



Delicates

30°C

- 30°C

600

(**)

1.0

–





–



Synthetics

40°C

- 60°C

1200

5.5

–











Dosing required



Dosing optional