Whirlpool FFD 10469 BSV UK - User Manual

EN

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your appliance on

www.whirlpool.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed

instructions on how to remove them, see the Installation Guide.

PROGRAMME CHART

1.

“ON/OFF” button

2.

Programme selector

3.

“Temperature” button

4.

“Spin” button

5.

“Start delay” button

6.

“Start/Pause” button

7.

Option buttons

8.

“Key lock“button

INDICATORS

Door can be opened

Washing phase

Indicates washing phase of the cycle

Failure: Call Service

Refer to Troubleshooting section

Failure: Water filter clogged

Water cannot be drained; water filter

might be blocked

Failure: Water tap closed

No or not sufficient inlet water. “Beep”

sound every 5 seconds.

In the event of any failures, refer to the

Troubleshooting section in USER MANUAL

CONTROL PANEL

2.

1.

6.

3.

4.

5.

8.

7.

7.

PRODUCT DESCRIPTION

1.

Worktop

2.

Detergent dispenser

3.

Control panel

4.

Door handle

5.

Door

6.

Water filter - behind plinth

7.

Plinth (removable)

8.

Adjustable feet (4)

1.

2.

7.

3.

4.

5.

6.

8.

DETERGENT DISPENSER

Main wash compartment

Detergent for the main wash, stain remover

or water softener. For a liquid detergent it is

recommended to use removable plastic partition

A

(supplied) for a proper dosage. If powder

detergent is used, place the partition into slot

B.

Prewash compartment

Detergent for the prewash.

Softener compartment

Fabric softener. Liquid starch.

Pour in softener or starch solution only up to the “max” mark.

Release button



Press to remove tray for cleaning.

A

B



* After programme end and spinning with maximum selectable spin speed, in default

programme setting.

** The duration of the programme is shown on the display.
*** The display will show the suggested spin speed as default value.

6th Sense -

the sensor technology adapts water, energy and programme duration to your wash

load.

This data may differ in your home due to changing conditions in inlet water temperature,

water pressure etc. Approximate programme duration values refer to the default setting of

the programmes, without options. The values given for programmes other than the Eco 40-60

programme are indicative only.

Eco 40-60 -

Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most efficient

programme in terms of energy and water consumption for washing normally soiled cotton laundry.

Note:

spin speed values shown on the display can slightly differs from the values stated in the table.

For all Test Institutes:

Long wash cycle for cottons: set wash cycle

Cotton

with a temperature of 40°C.

Synthetic program along: set wash cycle

Synthetics

with a temperature of 40°C.

Max load 10 Kg

Power consumption in off -mode 0.5 W / in left-on mode 8 W

Detergents and additives

Recommended

detergent

Residual

dampness % (*)

Ener

gy

consumption kW

h

Total w

at

er lt

Laundr

y

temper

atur

e °C

Programme

Temperatures

Max. spin

speed

(rpm

Max

load

(kg

Dura-

tion

(h : m)

Prewash

Main

wash

Softener

Pow-

der

Liquid

Setting

Range

Mixed

40°C

- 40°C

1000

10,0

**

–





–



–

–

–

–

White (Whites)

60°C

- 90°C

1400

10,0

2:40



(90°)









54

1,90

100

55

Cotton

40°C

- 60°C

1400

10,0

3:55

–









49

1,14

107

45

Eco 40-60

40 °C

40°C

1351

10,0

3:55

–









53,0 0,82

69

31

1351

5,0

3:00

–









53,0 0,55

56

29

1351

2,5

2:30

–









53,0 0,29

38

25

Bed linen

60°C

- 60°C

1400

10,0

**

–









–

–

–

–

Sport

40°C

- 40°C

600

4,5

**

–





–



–

–

–

–

Duvet (Duvets)

30°C

- 30°C

1000

3,5

**

–





–



–

–

–

–

Steam Refresh

–

–

–

2

**

–

–

–

–

–

–

–

–

–

Spin & Drain (Spin +

Drain)

–

–

1400

10,0

**

–

–

–

–

–

–

–

–

–

Rinse & Spin (Rinse +

Spin)

–

–

1400

10,0

**

–

–



–

–

–

–

–

–

Rapid 30’

30°C

- 30°C

1200 (***)

5,5

0:30

–





–



71

0,21

50

27

20°C

20 °C

- 20 °C

1400

10,0

1:50

–





–



55

0,20

95

22

Silk

30°C

- 30°C

600 (***)

1,0

**

–





–



–

–

–

–

Wool

40°C

- 40°C

800

2,5

**

–





–



–

–

–

–

Delicates

30°C

- 30°C

600 (***)

1,0

**

–





–



–

–

–

–

Synthetics

40°C

- 60°C

1200

5,5

2:55

–









35

0,83

80

43



Dosing required



Dosing optional