Vermont Casting VM508K - Manual
Vermont Casting VM508K – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NO NEED TO RETURN TO THE STORE; TO HELP US HELP YOU; DE VOTRE BARBECUE; Appelez-nous sans frais; POUR NOUS AIDER À VOUS AIDER; Veuillez remplir les données suivantes :; PARA AYUDARNOS A AYUDARLE; Complete la siguiente información:
- Page 3 – Step 1: Unpack Carton and Verify Contents; Heavy cook grates are lo-; VM508K Carton Contents; Side Burner Assy
- Page 4 – VM658K Carton Contents; Rotisserie Kit
- Page 5 – Parts Required; Remove protective layer from; Figure 1; Figure 2
- Page 6 – Figure 3; Figure 4
- Page 7 – Step 7: Attach Door Assembly and Door Handle; Figure 5; Figure 6
- Page 8 – Step 8: Attach Grease Cup Holder; Figure 7
- Page 9 – Attach left skirt assembly to the unit:; Step 9: Attach Skirt; Figure 8; Inverted View; Figure 9; Corner Post Detail
- Page 10 – Step 10: Attach Side Panels; Remove protective layer from side panels.
- Page 11 – Step 12: Attach Grill to Cabinet Assembly; This step requires a minimum of 2
- Page 12 – Step 13b: Secure Hose to the Cabinet; Gas Line Clamp Detail
- Page 13 – Remove protective layer from left and right shelf.; Right Side Shelf; U-Type Fastener Detail; Left Side Shelf
- Page 14 – Step 16: Attach Right Shelf Assembly to Grill; Right Shelf Assembly; ” screws to the side of the grill.
- Page 15 – Step 17: Attach Left Shelf Assembly to Grill; Left Shelf Assembly; For side shelf opening: if you have any problems opening or; For grill models with a marinating station: Loosen the two (2)
- Page 16 – Step 19: Attach Knobs; Depending on your model, your grill may; Step 18: Attach Side Burner Assembly; Eight (8) “AA” batteries are required for all grill models.
- Page 17 – Step 22: Install the Internal Components; Doing so could result in severe burns and other injuries.
- Page 18 – Step 23: Interior Shelf Installation
- Page 20 – CFM Corporation
����������������
����
VM508K / VM658K Assembly Procedures
Knock Down Models
Tools Required:
Knife or scissors, Phillips or Robertson (square head)
screwdriver, 7/16” and 3/8” wrench or ratchet. The use of a manual
screwdriver is strongly recommended. A power drill may cause damage
to the unit or stripping of the protective coating.
50004825 12/07 Rev. 3 En
Model VM508K Shown
CAUTION: This grill is intended ONLY to be used as a cart model, this grill cannot be built
into an enclosure.
CAUTION: The assembly of this grill requires two (2) people.
WARNING: Some parts may have sharp edges; to avoid injury, wearing gloves during assem-
bly, lifting or moving the grill is recommended. Protective eyewear and long sleeves are also
strongly recommended.
NOTE:
Remove the protective plastic coating from the stainless steel, failure to do so will void the
warranty.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 50004825 VM508K / VM658K Assembly CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving the grill is recommended. STOP! NO NEED TO RETURN TO THE STORE Questions With The Assembly? Require Parts Information? Product Under Manufacturer’s Warrant...
3 50004825 VM508K / VM658K Assembly CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov-ing the grill is recommended. Step 1: Unpack Carton and Verify Contents Use a sharp cutting tool to cut the straps on the packaging and open the carton top. R...
4 50004825 VM508K / VM658K Assembly CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving the grill is recommended. Box 6 Box 4 Box 3 Box 10 Box 7 Box 2 Box 1 Box 9 Box 8 Condiment Left Condiment Right Box 5 Box 9 Box 11 ������������������������...
