Vermont Casting VCS501 - Manual

Vermont Casting VCS501

Vermont Casting VCS501 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
Page: / 18

Table of Contents:

  • Page 2 – VCS501 Series Assembly; moving the grill is recommended.; Step 1: Unpack Carton and Verify Contents; VCS501 Series Carton Contents
  • Page 3 – ing the grill is recommended.; Step 2a: Install the Casters; This step requires people.
  • Page 4 – Step 2b: Attach Skirt; Figure 3; Corner Post/Skirt Detail; Figure 2; Inverted View
  • Page 5 – Step 3: Grease Pan / Grease Cup Installation; Figure 4
  • Page 6 – Right Side Shelf
  • Page 7 – Left Side Shelf; Figure 5
  • Page 8 – Step 6: Attach Right Shelf Assembly to Grill; Right Shelf Assembly; ” screws to the side of the grill.; Figure 6
  • Page 9 – Step 7: Attach Left Shelf Assembly to Grill; Left Shelf Assembly; Figure 8
  • Page 10 – Figure 9; Rear View
  • Page 11 – Step 9: Attach Side Burner Assembly
  • Page 12 – Step 12: Install the Internal Components; when not being used.; Cooking Tips - Smoker Box; bowl of water for at least 0 minutes.
  • Page 13 – Doing so could result in severe burns and other injuries.
  • Page 14 – Step 13: Install the LP Cylinder; tor and how to test for leaks before you try lighting the grill.
  • Page 15 – Step 14: Install the Natural Gas Hose
  • Page 16 – Step 15: Install Shelf Light; Battery Installation; Operating Instructions; WARNING: The light may get hot when in close proximity to
  • Page 18 – MHSC
Loading the manual

Assembly Procedures

VCS501 Series

Tools Required:

Knife or scissors, Phillips or Robertson (square head) screwdriver, 7/16” and 3/8” wrench

or ratchet. The use of a manual screwdriver is strongly recommended. A power drill may cause damage to

the unit.

30005436 3/11 Rev. 3 En

CAUTION: This grill is intended ONLY to be used as a cart model, this grill cannot be built into an

enclosure.
CAUTION: The assembly of this grill requires two (2) people.
WARNING: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly,

lifting or moving the grill is recommended. Protective eyewear and long sleeves are also strongly

recommended.

5434
VCS501 Users guide cover
11/10

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - VCS501 Series Assembly; moving the grill is recommended.; Step 1: Unpack Carton and Verify Contents; VCS501 Series Carton Contents

30005436 VCS501 Series Assembly CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving the grill is recommended. Step 1: Unpack Carton and Verify Contents Use a sharp cutting tool to cut the straps on the packaging and then lift off the carton to...

Page 3 - ing the grill is recommended.; Step 2a: Install the Casters; This step requires people.

3 30005436 VCS501 Series Assembly CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov- ing the grill is recommended. Step 2a: Install the Casters This step requires people. Parts Required: (4) Casters ( with brake, rear; without brake, front) (1)...

Page 4 - Step 2b: Attach Skirt; Figure 3; Corner Post/Skirt Detail; Figure 2; Inverted View

4 30005436 VCS501 Series Assembly CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving the grill is recommended. B347attach skirt assy11/10 Step 2b: Attach Skirt (Optional) Parts Required: (1) Skirt Left Assembly (1) Skirt Right Assembly (1) Sk...

Other Vermont Casting Models

All Vermont Casting Other