Vermont Casting MEAD3EB - Manual

Vermont Casting MEAD3EB

Vermont Casting MEAD3EB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 2 – Traditional Cast Surround; Check Contents of Shipping Carton; 0 hex bolts and washers.; traditional surround; General Information
  • Page 3 – Attach the Surround to the Montpelier; Once the insert is installed and tested for proper
  • Page 4 – Small Cast Profile Surround; Always place castings on a flat protected; Surround Parts; Assembly Instructions; Place the key on your work surface with the thread-; column right; column left; Install the upper mounting bracket. Use the upper
  • Page 5 – Fasten the upper mounting bracket to both column
  • Page 6 – Installation Instructions; Once the insert has been installed and tested for; install trim
  • Page 7 – Georgian Cast Surround; Cast iron parts can be heavy, an assistant; Installation; In the initial assembly of Steps 1
  • Page 9 – Assemble the Surround to the Insert; Once the insert is installed and tested for proper
  • Page 10 – Replacement Parts; small cast surround parts; Classic Black; Slider Clip Right
  • Page 11 – LHEABSL; Frame Left Assembly; Bevel Cast Trim Surround; Hood Trim Mounting
  • Page 12 – Cast Trim Mounting Bracket; MHSC
Loading the manual

Montpelier Surround

Installation Instructions

for use with the
Montpelier Wood Insert

The Montpelier Wood Insert has several different sur-
round options: Traditional Cast Surround, Small Cast
Profile Surround, Bevel Cast Trim Surround, Steel
Surround Panels, and Georgian Cast Surround. The in-
stallation instructions for each are found in this manual.
Locate the correct instructions for your model and
proceed with the installation.

NOTE:

Cast iron parts can be heavy, an assistant

would be advisable.

CAUTION: Porcelain enamel is fragile. The finish
can be easily damaged if castings are not handled
carefully. Always place castings on a protective
surface, such as a towel, blanket or carpet.

Table of Contents

Traditional Cast Surround
Models: MEAD3CB, MEAD3EB, MEAD3BS ................................................................... 2
Small Cast Profile Surround
Models: CAPCB, CAPEB ............................................................................................... 4
Bevel Cast Trim Surround
Model: LHEABSL ........................................................................................................... 6
Steel Surround Panels
Models: LHE30SSB, LHE30SLB, LHE30SLGA ............................................................. 6
Georgian Cast Surround
Models: 30DVSGTKCB, 30DVSGTKB ........................................................................... 7
Replacement Parts ........................................................................................................... 10

30004451 7/08 Rev. 2

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Traditional Cast Surround; Check Contents of Shipping Carton; 0 hex bolts and washers.; traditional surround; General Information

2 30004451 Traditional Cast Surround Models: MEAD3CB, MEAD3EB, MEAD3BS Read these instructions before beginning the instal-lation. Check Contents of Shipping Carton Compare contents of carton in Figure 2 with actual parts received. If any parts are missing or damaged, contact your dealer before star...

Page 3 - Attach the Surround to the Montpelier; Once the insert is installed and tested for proper

3 30004451 Attach the Surround to the Montpelier 1. Once the insert is installed and tested for proper operation as directed, stand the Traditional Cast Sur-round in front of the insert. 2. Position the surround in front of the insert and, with the help of an assistant, gently lift the surround up a...

Page 4 - Small Cast Profile Surround; Always place castings on a flat protected; Surround Parts; Assembly Instructions; Place the key on your work surface with the thread-; column right; column left; Install the upper mounting bracket. Use the upper

4 30004451 Small Cast Profile Surround Models: CAPCB, CAPEB Read these instructions before beginning the instal-lation.CAUTION: Always place castings on a flat protected work surface, such as a towel, blanket or carpet.These instructions are for the assembly and installation of the Small Cast Profile S...

Other Vermont Casting Models

All Vermont Casting Other