Page 2 - Dutchwest Non-Catalytic Convection Heater; Proposition 65 Warning:; Table of Contents; Clearance-reducing Right Side Heat Shields; PLEASE NOTE
2 Dutchwest Non-Catalytic Convection Heater 30002278 The Dutchwest Model 2478 covered in this Owner’s Guide has been tested and listed by OMNI - Test Laboratories, Inc. of Beaverton, Oregon. The test stan-dards utilized were UL 1482 for the United States and ULC S-627 for Canada. Dutchwest Model 247...
Page 3 - Specifications
3 Dutchwest Non-Catalytic Convection Heater 30002278 1. Maximum burn times and heat outputs are based on laboratory testing using full loads of seasoned hardwoods, and may vary in individual use depending on how the stove is operated, type and moisture content of fuels, and other factors. Maximum bu...
Page 4 - Installation; Failure to follow these installation instruc-; Chimney Types; The chimney should be thoroughly cleaned before use.
4 Dutchwest Non-Catalytic Convection Heater 30002278 Installation SAFETY NOTICE: IF YOUR DUTCHWEST CON-VECTION HEATER IS NOT PROPERLY INSTALLED, OPERATED AND MAINTAINED, A HOUSE FIRE MAY RESULT. FOR SAFETY, FOLLOW ALL INSTALLA-TION, OPERATION AND MAINTENANCE DIREC-TIONS. CONTACT LOCAL BUILDING OFFIC...
Page 5 - chimney connector
5 Dutchwest Non-Catalytic Convection Heater 30002278 Prefabricated Chimneys A prefabricated metal chimney must be one tested and listed for use with solid-fuel burning appliances. A horizontal connector run should be inclined 1/4” per foot (20 mm per meter) from the stove toward the chimney. The rec...
Page 6 - Double-Wall Connector; Securing the Connector to a
6 Dutchwest Non-Catalytic Convection Heater 30002278 Double-Wall Connector Information on assembling and installing double-wall connectors is provided by the manufacturer of the double-wall pipe. Follow the manufacturer’s installation instructions exactly. Most manufacturers of prefabri-cated double...
Page 7 - Securing the Connector; Double-check connector clearance from the ceiling.
7 Dutchwest Non-Catalytic Convection Heater 30002278 Securing the Connector to a Masonry Chimney The Dutchwest Convection heater may be connected to either a freestanding masonry chimney or a masonry fireplace chimney. Freestanding Installations If the chimney connector must pass through a combus-tib...
Page 8 - Fireplace Installations -; If the stove is installed without legs, we recommend
8 Dutchwest Non-Catalytic Convection Heater 30002278 Fireplace Installations - Through the Fireplace The Convection heater may be installed either without legs* as a fireplace insert, or with standard legs at-tached - depending on the safety regulations that apply to your situation, the height of the...
Page 9 - Do not vent your Dutchwest stove into a factory-; Floor Protection; hr °F or an equivalent material with; combustible support; Model; Canada
9 Dutchwest Non-Catalytic Convection Heater 30002278 A flush-mounted sheet metal cover may be used on one side only. If covers must be used on both sides, each cover must be mounted on non-combustible spacers at least 1” (25 mm) clear of the wall. Your Dutchwest dealer or your local building inspecto...
Page 10 - Floor Protection for Fireplace
10 Dutchwest Non-Catalytic Convection Heater 30002278 Procedure: 1. Convert specifications to R-value: i. R-value given - no conversion needed.ii. k-factor is given with a required thickness (T) in inches: iii. K-factor is given with a required thickness (T) in inches: iv. r-factor is given with a re...
Page 11 - Fireplace Installation Clearances; Clearances; Keep the Stove a Safe Distance
11 Dutchwest Non-Catalytic Convection Heater 30002278 Fireplace Installation Clearances A fireplace installation requires special clearance be-tween the: • Side of the stove and the right and left walls • Side of the stove and the decorative side trim on the fireplace face • Top of the stove and the m...
Page 12 - Designing a Safe Installation; exit diagram; Unprotected Surfaces; Parallel Installations
12 Dutchwest Non-Catalytic Convection Heater 30002278 Designing a Safe Installation The section that follows contains charts with the infor-mation that you’ll need to make your installation safe. Included are a chart to tell you exactly where to cut the hole in the ceiling so that the stove will mee...
Page 13 - Stove and Chimney Connector Clearance Charts; Model 2478 Medium Convection Heater
13 Dutchwest Non-Catalytic Convection Heater 30002278 1. Shielding for a top exit stove must include a flue collar shield to protect the area behind the flue collar.2. Chimney connector heat shields must extend exactly 24” (610 mm) above the flue collar of the stove.3. Dimension is to the top plate of ...
Page 14 - dutchwest
14 Dutchwest Non-Catalytic Convection Heater 30002278 Distance from Center of Flue Collar to Wall in Top-Exit Installations Dutchwest Convection Heater Model 2478 NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue col-lar will be for various installa...
Page 15 - Wall Heat Shield Dimensions; DutchWest Non-Catalytic Convection Heater Model #2478
15 Dutchwest Non-Catalytic Convection Heater 30002278 Wall Heat Shield Dimensions DutchWest Non-Catalytic Convection Heater Model #2478 ST802 sidewall protection 5/04 48” (1220 mm) 60” (1525 mm) Spaced 1” (25 mm) from Floor ST802 Fig. 17 Sidewall protection. ST803 corner wall protection 5/04 60” (15...
Page 16 - Unpack the Parts; Assembly
16 Dutchwest Non-Catalytic Convection Heater 30002278 Your convection heater requires some assembly. Follow the directions carefully and refer to the parts diagram at the back of this manual. Unpack the Parts Remove the bottom heat shield strapped to the top of the stove and all loose parts from the...
Page 17 - Fan Kit Installation
17 Dutchwest Non-Catalytic Convection Heater 30002278 6. Reposition the stove so the other front corner over- hangs the pallet and remove the leg bolt from the bottom of the stove. Align the leg with the bolt hole in the bottom of the stove, and attach it with the bolt and washer. Tighten securely. ...
Page 18 - Heater Controls and Features; Air Control Lever; is located at the lower front; Operation
18 Dutchwest Non-Catalytic Convection Heater 30002278 Heater Controls and Features Air Control The Dutchwest Convection Heater Model 2478 has a control that regulates the amount of air drawn into the stove. Generally, more air entering the stove allows the fire to burn hotter and faster, while less a...
Page 19 - Successful Wood Burning; The; Damper; is operated by moving the handle on; Load Doors; Side Loading Door; allows the easiest loading of; Front Door; opens for adding an occa-; Open
19 Dutchwest Non-Catalytic Convection Heater 30002278 Successful Wood Burning Woodburning is often said to be more of an art than a science. You’ll easily master the art if you start by using good, dry fuel and by understanding how the stove’s air supply system operates. Burn Only High-Quality Fuel ...
Page 20 - Use the Air Control Settings; air settings; High
20 Dutchwest Non-Catalytic Convection Heater 30002278 Use the Air Control Settings that Work Best for You No single control setting will fit every situation. Each installation will differ depending on the quality of the fuel, the amount of heat desired, and how long you wish the fire to burn. Control ...
Page 21 - Reloading and Reviving the Fire
21 Dutchwest Non-Catalytic Convection Heater 30002278 You’ll soon find that this stove is HOT WHILE IN OPER- ATION! KEEP CHILDREN, CLOTHING, AND FURNI-TURE AWAY. CONTACT MAY CAUSE SKIN BURNS.DO NOT OVERFIRE THIS HEATER. Overfiring may cause a house fire, or can result in permanent damage to the stove. ...
Page 22 - Remove Ashes Frequently; ash pail; Safe Ash Handling; Note; : It may take days for these
22 Dutchwest Non-Catalytic Convection Heater 30002278 Remove Ashes Frequently Wear heavy stove gloves when removing ashes. Check the ash compartment before reloading the stove. If the ash pan is nearly full, empty the pan. Before replacing the ash pan, clear away any ash that may have spilled over t...
Page 23 - Never use liquid cleaning; If you wish to clean the glass; Maintenance; door gasket; Wearing safety goggles, use a wire brush or the tip
23 Dutchwest Non-Catalytic Convection Heater 30002278 Keep Your Stove Looking New And Working Its Best Care of the Cast Iron Surface An occasional dusting with a dry rag will keep the painted cast iron of your Dutchwest Convection Heater looking new. If the paint needs retouching, allow the stove to...
Page 24 - Avoid Damaging the Glass Door Panel; damper rod; primary air control
24 Dutchwest Non-Catalytic Convection Heater 30002278 3. Apply a thin bead of stove cement in the newly- cleaned groove. 4. Lay the gasket into the groove. Wait until you are a couple inches from the end before you cut it. 5. Test the gasket by closing the door on a slip of paper as described above....
Page 25 - Cleaning the Chimney System; Clear any ash build-up from around the air holes and; ANNUAL SPRING CLEANING:; Check gasketing for wear, and replace if necessary.
25 Dutchwest Non-Catalytic Convection Heater 30002278 Cleaning the Chimney System The chimney system is composed of the chimney and the pipe that connects the stove to the chimney. Inspect the chimney and chimney connector at least twice monthly, and clean if necessary. When you first begin using the...
Page 26 - The Chimney Connector; Thoroughly clean the chimney.
26 Dutchwest Non-Catalytic Convection Heater 30002278 helpful) and vacuum away ash using a flexible vacu-um hose inserted into each passage. Care should be taken not to damage the white fibrous material in this rear chamber. (Fig. 34) The Chimney Connector TWO WEEKS: • Inspect the chimney connector an...
Page 27 - Masonry Chimney; Draft Management
27 Dutchwest Non-Catalytic Convection Heater 30002278 Your stove is only one part of a system that includes the chimney, the operator, the fuel, and the home. The other parts of the system will affect how well the stove works. When there is a good match between all the parts, the system works well. ...
Page 29 - Conclusion
29 Dutchwest Non-Catalytic Convection Heater 30002278 of the other appliances. If you need to crack a nearby window or door to enable the chimney to pull well, you should install an outside-air intake to bring combustion air into the room. Conclusion Woodburning is more an art than a science. Art in...
Page 30 - Dutchwest Convection Heater; Ref. Description
30 Dutchwest Non-Catalytic Convection Heater 30002278 CFM Corporation reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice. Dutchwest Convection Heater Model 2478 29 26 27 32 37 21 19 12 38 41 24 25 16 30 37 23...
Page 32 - CFM Corporation; LIMITED LIFETIME Warranty; Limited Lifetime Warranty
© CFM Corporation 2695 Meadowvale Blvd. • Mississauga, Ontario, Canada L5N 8A3 800-668-5323 • www.cfmcorp.com CFM Corporation LIMITED LIFETIME Warranty For Dutchwest Non-Catalytic Wood Stove Limited Lifetime Warranty CFM Corporation warrants that all refractory brick and material used in this produc...
