Tripp Lite U238-000 - Manual

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

Important Safety Instructions

•

Keep this equipment away from humidity.

•

Keep this Owner's Manual for future reference.

Have this equipment checked by a service technician if:

•

It has been exposed to moisture

•

It has been dropped and damaged

•

It shows obvious sign of breakage

•

It has not been working properly or you cannot get it to work according to the instructions given in this Owner's Manual

Package Contents

Before installation, check to ensure that the package contains the following items:

•

USB 2.0 to SATA/IDE Combo Adapter

•

Serial ATA Cable

•

AC/DC Power Adapter

•

2.5" to 3.5" IDE Converter

•

AC Power Cord

•

HDD Power Cable

Overview

The U238-000 USB 2.0 to SATA/IDE Combo Adapter lets you use IDE hard drives, SATA (serial ATA) hard drives or both over a USB 2.0 connection. This enables you to continue utilizing an
existing IDE drive while transitioning to the new SATA technology, which provides a faster transfer speed of up to 150 Mbps. Both 2.5" IDE and (using a converter) 3.5" IDE drives are supported.
You can exchange data between SATA and IDE drives by attaching both drives at the same time. The U238-000 can also turn any SATA or IDE drive into an external USB 2.0 storage device.

Product Features and System Requirements

Product Features

•

Compliant with SATA 1.0a and USB 2.0 specifications

•

Operates with one IDE and one SATA HDD simultaneously

•

Compliant with USB Mass Storage Class Bulk-Only

•

External power supply included

Transport specification

•

Plug-and-play functionality

•

Dual-Head IDE connector (40Pin and 44Pin) plus SATA connector; supports 2.5"/3.5"/5.25" IDE and SATA devices (2.5" to 3.5" IDE converter required for 3.5" IDE drive)

Installation

System Requirements

• IBM-compatible Pentium 233 MHz or faster PC or MAC with USB support

•

Windows

®

ME/2000/XP/Vista; Mac OS 8.6 and later

You may connect a single IDE and/or a single SATA (serial ATA) hard drive to the
adapter. (Refer to Figure 1.)

Connecting a SATA Hard Drive

1. Connect the included SATA cable to the receptacleson the SATA hard drive and the

adapter.

2. Connect the mini 4-pin end of the included HDD power cable to the adapter's DC

connector, and the 15-pin SATA female power connector end to the 15-pin power
connector on the hard drive.*

3. Connect the single DC output connector of the power adapter to the DC IN jack on

the adapter. Connect the included power cord to the power adapter, then plug it into
an AC outlet.

* Note:

If your SATA hard drive comes with a legacy 4-pin power connector, use the

4-pin power connector instead. To connect to both an IDE hard drive and a SATA hard
drive with a legacy 4-pin power connector, you will need a 4-pin Y-type power cable
to convert a single 4-pin power connector into a double 4-pin power connector.

Connecting an IDE Drive

1. Connect your 2.5" IDE device to the IDE connector of the adapter. To connect to a 3.5"

IDE hard drive or 5.25" CD/DVD drive, first connect the 2.5" to 3.5" IDE converter.

2. If connecting a 3.5" or 5.25" IDE device, connect the mini 4-pin end of the included

power cable to the adapter's DC connector, and the large 4-pin female end to the
power connector on the IDE drive.

3. Connect the single DC output connector of the power adapter to the DC IN jack on

the adapter. Connect the included power cord to the power adapter, then plug it into
an AC outlet.

Connecting to Computer—

Connect one end of the USB cable to the adapter and the other to a free USB port on the computer.

Operation

After completing installation, you can use attached hard drives as external USB 2.0 storage devices. (

Note:

A brand-new hard drive must

first be partitioned and formatted. You can do this using the Windows Disk Management utility in Windows XP/2000 or other disk
management software programs. For specific instructions, refer to your software documentation.)

Under Windows, the external hard drive(s) will be displayed in My Computer. An USB device monitor icon will appear on the notification
area of the taskbar. (Figure 2) Drive names and letters will vary depending on your configuration. An USB device monitor icon will appear on
the notification area of the taskbar. (Figure 3)

Under Mac, the attached hard drive will be mounted to the desktop and appears as a removable media device. (Figure 4) You can read
and write files from and to the attached external hard drive(s) as you would with an ordinary hard drive.

Specifications

Figure 1: Exterior Overview

1

USB 2.0 to SATA/IDE Combo Adapter

Model: U238-000

Owner’s Manual

WARRANTY

REGISTRA

TION

Register online toda

y f

or a c

hance to

win a FREE

Tripp Lite pr

oduct!

www

.tripplite

.com/warranty

Figure 3: Windows USB
Device Monitor Icon

Figure 4: Mac Removable
Media Device Desktop Icon

Figure 2: Windows Hard Disk Drives Display

Serial ATA Interface

Compliant with Serial ATA 1.0a

Parallel ATA Interface

Ultra ATA/133 Parallel Interface

USB Interface

USB 2.0; Backward Compatible with USB 1.1

Transfer Speed:

1.5/12/480 MBps

Connectors

SATA: 7-Pin Signal Male Connector IDE: 44-Pin
Female Connector (2.5"-to-3.5" converter;
44 Male to 40 Female)

Power Source

Input: AC 100-240V

Output:

12V DC/2A

System Support

Windows: Windows ME/2000/XP/Vista

Macintosh:

Mac OS 8.6 and Higher

Certifications

FCC, CE, RoHS Compliant

Caution: The adapter supports bus power for a connected 2.5" hard drive. However, USB port power output varies by computer. If your system cannot detect the 2.5" hard drive, it
may be that the USB port is not supplying sufficient power, in which case an additional power connection will be required.