Tripp Lite Switched Rack PDU - Manual
Tripp Lite Switched Rack PDU – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Mounting the PDU
- Page 3 – Connecting the PDU; Features; Installation
- Page 4 – Networking the PDU; Connect PDU to Network:; Static IP Address Assignment; Determine IP Information:
- Page 5 – Configure PDU in Terminal Mode:; Testing Network Connection; Access PDU with Web Browser:
- Page 7 – Cord Retention Bracket:
- Page 8 – Configuration and Operation; Remote Monitoring and Control; and more via Web browser, telnet; Technical Support
- Page 9 – Warranty and Warranty Registration; LIMITED WARRANTY
Owner’s Manual
W
arranty
Registration
Register online toda
y f
or a chance
to win a FREE
Tr
ipp Lite product!
www
.tr
ipplite
.com/w
arr
anty
Switched Rack PDU
Zero U (Vertical) Format
Important Safety Instructions
2
Installation
2
Features
6
Technical Support
8
1111 W. 35th Street • Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
Copyright © 2008 Tripp Lite. All rights reserved.
Configuration and Operation
8
Warranty and Warranty Registration
9
Español
10
Français
19
*
*CE logo applies to models with IEC power inlet.
200801103 93-2721 Switched PDU OM.qxd 1/24/2008 2:58 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that should be followed during the installation, operation, and storage of this product.Failure to heed these instructions and warnings will void the productwarranty. Important Safety Instructions Installation • The PDU provide...
3 Connecting the PDU 2-1 (Models with IEC power inlet only.) Select models have a detachable power cord. Attach theincluded power cord to the PDU by inserting theIEC connector of the power cord into the IEC power inlet located near the end of the PDU. Use the included bracket to secure the power cor...
4 Installation continued Networking the PDU Note: The MAC address of the PDU (a 12-digit string in this format: 000667xxxxxx) is printed on a label attached to the PDUenclosure. The MAC address is also printed on a label attached to the internal network card. If your network's DHCP server will assig...
