Tripp Lite SU10000RT3U2TF - Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail:

[email protected]

Model #: SU10000RT3U2TF

SmartOnline Expandable Rack/Tower UPS System - Online, double-conversion protection for mission-critical
applications

Highlights

10,000VA / 10kVA online 10U rack / tower UPS with expandable runtime (3U

Power Module + 3U Battery Pack + QTY 2 -2u stepdown transformers)

Zero transfer time, on-line, double-conversion and economy-mode operation

supported

Manual Bypass Switch and detachable PDU enables hot-swap UPS

replacement without powering off connected loads

Maintains 208V and simultaneous 120V output

2% output voltage regulation over an input voltage range of 156 to 276

Enhanced serial communications ports, SNMP/Web Card Slot and EPO

interfaces

$250,000 Ultimate LIfetime Insurance (USA & Canada only).

Description

10,000 VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 10 rack spaces

(3U power module, 3U battery pack and two 2U step-down transformers). Maximum installed rack depth of 32.5 in. Expandable battery runtime with

optional external battery packs. Full-time sine wave 208V and 120V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts

output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and

overvoltages to 276V. Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs. Standard 3-wire 208V

hardwire input connection; NEMA L6-30R, L6-20R and 5-15/20R output receptacles. Detachable input-output PDU module with manual bypass

switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero

transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and

optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network

interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer

at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power

status. LED/LCD display panel easily rotates for better viewing in rackmount or tower configurations. LCD panel with scroll buttons offers detailed

diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and

battery charge level. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included;

2POSTRMKITWM two post rackmount hardware accessories available. Field-replaceable, hot-swappable power module and external battery 2-year

warranty and $250,000

connected equipment insurance

; extended warranty and service contracts available.

Applications

Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection. Common

applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Package Includes

3U power module with detachable hot-swap PDU input/output panel and manaul bypass switch