Tripp Lite SRSWITCH - Manual
Tripp Lite SRSWITCH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – – Important Safety Instructions; SAVE THESE INSTRUCTIONS; – Introduction; mixture with air, oxygen or nitrous oxide.
- Page 3 – Note: Make sure the wire is not pinched by any part of the rack
- Page 4 – – Connection to SNMPWEBCARD and ENVIROSENSE; Security/Environmental Monitoring; can connect with any type of contact closure device.; – Warranty and Warranty Registration; Limited Warranty
Owner’s Manual
SmartRack
™
Accessories
Model: SRSWITCH
1111 W. 35th Street, Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
Copyright © 2008 Tripp Lite. All rights reserved.
WARRANTY
REGISTRA
TION:
register online toda
y f
or a
chance to win a FREE
Tripp Lite
product—www
.tr
ipplite
.com/w
arr
anty
1 – Introduction
0
2
1-1 Parts List
2
1-2 Tools Required
2
2 – Important Safety Instructions
2
3 – SRSWITCH Installation
3
3-1 Mounting the Switch and Magnet to the Rack Enclosure
3
3-2 Wiring the Switch
3
4 – Connection to SNMPWEBCARD and ENVIROSENSE
4
5 – Warranty and Warranty Registration
4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 2 – Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that must be followed during the installation and operation of the products described in this manual. Read all instructions and warnings thoroughly before attempting installation. Failure to co...
3 3 – SRSWITCH Installation The switch and magnet are designed to be mounted at the top of a SmartRack Premium Rack Enclosure. Magnet should be mounted flush against the inside edge of the Rack Enclosure door. Attach the switch to the outside of the Rack Enclosure cabinet and make sure both switch a...
4 4 – Connection to SNMPWEBCARD and ENVIROSENSE Security/Environmental Monitoring The SRSWITCH is for use only with Tripp Lite’s SNMPWEBCARD and ENVIROSENSE. The SNMPWEBCARD connects your UPS system or PDU to your Ethernet network as a manageable device that supports remote monitoring, remote contro...
