Tripp Lite SMARTINT3000VS - Manual

Page 2 - UPS Location Warnings; dust or direct sunlight.; UPS Connection Warnings; voided if anything is used to connect your UPS to an outlet.; Equipment Connection Warnings; Important Safety Instructions; SAVE THESE INSTRUCTIONS

2 UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight. • For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C). • Leave adequate space around all sides of the UPS for proper ventil...

Page 3 - Quick Installation

3 Quick Installation Insert a user-supplied powercord (with country-specific plug)into the UPS System’s IEC-320-C20AC Input Receptacle. Plug thecord into an AC wall outlet. NOTE! After you plug the UPS into a live AC outlet, the UPS (in“Standby” mode) will automatically charge its batteries, but wil...

Page 4 - The illustration (see; Optional Installation

4 These connections are optional. Your UPS will function properly without these connections. USB Communications Use the included USB cable to connect the USBport of your computer to the USB port of yourUPS. Install on your computer the Tripp LitePowerAlert Software appropriate to your computer’soper...

Page 5 - EPO Port Connection; Basic Operation; Buttons; • To turn the UPS ON:

5 EPO Port Connection This optional feature is only for those applica-tions which require connection to a facility’sEmergency Power Off (EPO) circuit. When theUPS is connected to this circuit, it enables emer-gency shutdown of the UPS's inverter. Using the cable provided, connect the EPO port ofyour...

Page 6 - continued; briefly press and release the

6 Basic Operation continued Indicator Lights (Front Panel) “MUTE/TEST” Button• To Silence (or “Mute”) UPS Alarms: briefly press and release the MUTE/TEST button. • To Run a Self-Test: with your UPS plugged in and turned ON, press and hold the MUTE/TEST button for two seconds.* Continue holdingthe bu...

Page 7 - “VOLTAGE CORRECTION” LED:

7 Basic Operation continued “VOLTAGE CORRECTION” LED: this green LED lights con- tinuously whenever the UPS is automatically correcting high orlow AC voltage on the utility line without the assistance of batterypower. The UPS will also emit a slight clicking noise. These arenormal, automatic operati...

Page 8 - AC Output Receptacles:

8 EPO Basic Operation continued AC Output Receptacles: Your UPS features IEC320-C13 AC out- lets, and select models also feature IEC320-C19 AC outlets. Theseoutput receptacles provide your connected equipment with AC linepower during normal operation and battery power during blackoutsand brownouts. ...

Page 10 - Specifications; Note on Labeling

Storage Before storing your UPS, turn it completely OFF: with the UPS ON and receiving utility power,press and hold the ON/OFF/STANDBY button for one second (an alarm will beep once brieflyafter the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPSfor an extended...

Tripp Lite SMARTINT3000VS - Manual

Table of Contents:

Summary

Other Tripp Lite Models