Tripp Lite POS Series - Manual
Tripp Lite POS Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Safety Instructions; UPS Location Warnings; Equipment Connection Warnings; Battery Warnings; SAVE THESE INSTRUCTIONS; Quick Installation
- Page 3 – Optional Installation; Basic Operation
- Page 4 – Storage
- Page 5 – Warranty Registration
Owner’s Manual
W
ARRANTY
REGISTRA
TION:
register online toda
y f
or a c
hance
to win a FREE
Tripp Lite pr
oduct—
www
.tripplite
.com/warranty
POS (Point-of-Sale) Series
UPS Systems
120V AC Input
Not suitable for mobile applications
Important Safety Instructions
Quick Installation
Storage and Service
Warranty Registration
Basic Operation
Español
1111 W. 35th Street • Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
Copyright © 2007 Tripp Lite. All rights reserved.
Français
2
2
3
4
5
6
12
Optional Installation
3
200711180 93-2716 POS OM.qxd 12/13/2007 1:50 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Important Safety Instructions UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight. • For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C). • Leave adequate space around all side...
3 Optional Installation For connection instructions, see the Basic Operation Section USB Communication Port: This port connects your UPS to a computer for automatic file saves and unattended shutdown in the event of a power failure. This connection is optional. The UPS will work properlywithout this...
4 OVERLOAD: This red LED will illuminate continuously to indicate that the UPS is overloaded, either when the UPS is providing power from battery or after a UPS self-test. If it illuminates, immediatelydisconnect some equipment from the battery backup protected outlets and run a self-test. Note: A l...
