Tripp Lite OmniSmart & SmartPro USB - Manual
Tripp Lite OmniSmart & SmartPro USB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Safety Instructions; UPS Location Warnings; UPS into itself this will damage the UPS.; Equipment Connection Warnings; There are no user-serviceable parts inside.; SAVE THESE INSTRUCTIONS
- Page 3 – Quick Installation; UPS
- Page 4 – Basic Operation; USB Communications; optional; Buttons
- Page 5 – continued
- Page 6 – CHARGE ONLY; Other UPS Features
- Page 7 – The USB port connects your UPS to any USB workstation; Battery Replacement Door:; Under normal conditions, the original bat-; Automatic Voltage Regulation:
- Page 8 – Specifications; Note on Labeling
Owner’s Manual
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Important Safety Instructions
2
Quick Installation
3
Basic Operation
4
Storage & Service
7
Specifications
8
OmniSmart
™
& SmartPro
®
USB
120V Input/Output, Line-Interactive UPS Systems
Copyright
©
2003 Tripp Lite. All rights reserved.
OmniSmart
™
is a trademark of Tripp Lite. SmartPro
®
is a registered trademark of Tripp Lite.
Español
9
Français
17
UL1778
200306109 OmniSmart and SmartPro USB Owner’s Manual.qxd 7/14/2003 4:55 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Important Safety Instructions 2 UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C). • Leave adequate space around all sides of the UPS for ...
3 Quick Installation Connect your UPS to an electrical outlet. Your UPS will run a self-test after it isplugged in. See Basic Operation to understandthe results of its self-test. Plug your computer, monitorand other equipment intothe UPS system. Your UPS is designed to support only comput-er equipme...
4 Use the ON/OFF button to do three things: Switch your UPS’s Operating Mode: While your UPS is plugged into a live AC outlet, press the ON/OFF button and hold it until you hear a beep (about 2 seconds) to toggle between the following operat-ing modes. Choose your UPS’s operating mode based on the r...
