Tripp Lite OMNI500ISO - Manual
Tripp Lite OMNI500ISO – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Safety Instructions; UPS Location Warnings; Equipment Connection Warnings; SAVE THESE INSTRUCTIONS
- Page 3 – Quick Installation
- Page 4 – Basic Operation; USB Communication Port; optional; Buttons
- Page 5 – continued
- Page 6 – Other UPS Features
- Page 8 – Note on Labeling; Warranty Registration
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Important Safety Instructions
2
Quick Installation
3
Basic Operation
4
Storage & Service
7
Warranty Registration
8
OMNISMART
™
Full Isolation UPS Systems
•
Full Isolation (Less than 300µA Leakage)
•
Line-Interactive Operation
•
120V Input
Not suitable for mobile applications.
Copyright
©
2006 Tripp Lite. All rights reserved. OmniSmart
™
is a trademark of Tripp Lite.
W
arranty
Registration:
register online toda
y f
or a c
hance
to win a FREE
Tripp Lite pr
oduct—
www
.tripplite
.com/warranty
Español
9
Français
18
200607050 93-2490 OmniSmart ISO Update.qxd 7/26/2006 11:39 AM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Important Safety Instructions 2 UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C). • Leave adequate space around all sides of the UPS for ...
3 Quick Installation Connect your UPS to an electrical outlet. Your UPS will run a self-test after it isplugged in. See Basic Operation to understandthe results of its self-test. Plug your computer, monitorand other equipment intothe UPS system. Your UPS is designed to support only com-puter equipme...
4 Use the ON/OFF button to do three things: Switch your UPS’s Operating Mode: While your UPS is plugged into a live AC outlet, press the ON/OFF button and hold it until you hear a beep (about 2 seconds) to toggle between the following operat-ing modes. Choose your UPS’s operating mode based on the r...
