Tripp Lite INT 3000 - Manual
Tripp Lite INT 3000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety
- Page 3 – Quick Installation
- Page 5 – Basic Operation; Switches; Indicator Lights
- Page 6 – Other UPS Features; AC Receptacles
- Page 7 – Specifications; Storage; Wire Color-Code Chart; External Battery Connector
1
Copyright ©2000 Tripp Lite. All rights reserved. SmartPro
®
is a registered trademark of Tripp Lite.
Quick Installation:
p. 3 - 4
Basic Operation:
p. 5 - 7
Storage & Service:
p. 7
Specifications:
p. 7
Safety:
p. 2
Warranty & Insurance: p. 6
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Owner's Manual
SmartPro
®
INT
SmartPro
®
XL INT
2200-3000 VA
Intelligent, Line-Interactive
UPS Systems (230V)
ESPAÑOL: p. 8
FRANÇAIS: p. 15
DEUTSCH: p. 22
9905248 DON'T ARCHIVE!!! 2200-3000 VA 230V SmartPro OM.p65
6/20/00, 10:13 AM
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 This manual contains important instructions and warnings that should befollowed during the installation, operation and storage of all Tripp Lite UPSSystems. UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep th...
3 Quick Installation Connect the UPS to an electricaloutlet and a computer to theUPS. • Unplug the computer’s power cord from both your AC outlet and the computer’s AC input. • Insert the female plug of the computer’s cord (B) into your UPS’s AC input. Insert the male plug of yourcomputer’s cord int...
5 Basic Operation Switches System Enable Switch (DIP Switch #4) This switch is on the back panel in the set of 4 switches next tothe UPS’s DB9 ports. It activates the battery charger and intelligentmicroprocessor. Always leave it in the “ENABLE” (UP) positionwhen your UPS is plugged in. Set the swit...
